MyStarbie---Hack-Club-Half-Life-Week-1-Project
Ananya-Arunkumar·MyStarbie---Hack-Club-Half-Life-Week-1-Project·PCB/Starbie.kicad_pcb
About the MyStarbie---Hack-Club-Half-Life-Week-1-Project PCB
MyStarbie---Hack-Club-Half-Life-Week-1-Project is an open source ESP32 PCB design by Ananya-Arunkumar, published on GitHub. It is a 2-layer board measuring 110 × 110 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.
From the project
A PCB made for Hack Club Half Life, based on starbie tutorial by SharKingStudios. NOT MY OWN ORIGINAL IDEA
All of this is made through KiCad. Please download the necessary software and download the files for custom footprints and symbols.
Main components on the MyStarbie---Hack-Club-Half-Life-Week-1-Project
MyStarbie---Hack-Club-Half-Life-Week-1-Project bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-SMD | U1 |
| 1 | DHT11 | Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | Conn_01x04_Pin | Display_128x64_096_I2C | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 2 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2 |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
MyStarbie---Hack-Club-Half-Life-Week-1-Project design files
The KiCad project lives in the Ananya-Arunkumar/MyStarbie---Hack-Club-Half-Life-Week-1-Project repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Starbie.kicad_pcb
- SchematicPCB/Starbie.kicad_sch
MyStarbie---Hack-Club-Half-Life-Week-1-Project: common questions
What microcontroller does the MyStarbie---Hack-Club-Half-Life-Week-1-Project use?
The MyStarbie---Hack-Club-Half-Life-Week-1-Project is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the MyStarbie---Hack-Club-Half-Life-Week-1-Project PCB?
The MyStarbie---Hack-Club-Half-Life-Week-1-Project measures 110 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MyStarbie---Hack-Club-Half-Life-Week-1-Project?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the MyStarbie---Hack-Club-Half-Life-Week-1-Project design files?
From the Ananya-Arunkumar/MyStarbie---Hack-Club-Half-Life-Week-1-Project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MyStarbie---Hack-Club-Half-Life-Week-1-Project design in my own project?
The repository has no license, so all rights stay with Ananya-Arunkumar. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MyStarbie---Hack-Club-Half-Life-Week-1-Project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k