LonoMacro

anasluqman089·LonoMacro·PCB/LonoMacro.kicad_pcb

LonoMacro PCB layout, top view — open source Nordic nRF board by anasluqman089

About the LonoMacro PCB

LonoMacro is an open source Nordic nRF PCB design by anasluqman089, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 82 × 50 mm, with 21 components from 8 distinct parts.

Its main chip is the XIAO-nRF52840-SMD, from the Nordic nRF family. By type, the board carries 8 switches, 4 connectors, 3 ICs, 3 diodes and 3 resistors.

It belongs with the iot & wireless, displays & leds and keyboards designs in this gallery.

From the project

LonoMacro is a modular macro keypad built around three XIAO nRF52840 boards: an OLED-equipped master, a keypad slave, and a rotary-encoder slave. The master connects to a computer over USB-C and to the slaves over Bluetooth Low Energy (BLE). Slave inputs are forwarded to the comp

LonoMacro is a modular macro keypad built around three XIAO nRF52840 boards: an OLED-equipped master, a keypad slave, and a rotary-encoder slave. The master connects to a computer over USB-C and to the slaves over Bluetooth Low Energy (BLE). Slave inputs are forwarded to the computer as USB keyboard events.

- PCB/ — KiCad schematic, PCB layout, and project files. - CAD/ — 3D STEP models. - Production/ — Gerber, drill, and STL manufacturing files. - firmware/ — Arduino sketches for the master and both slaves. - BOM.csv — Bill of materials, prices, and supplier search links.

LonoMacro, from the project README
From the project README

Main components on the LonoMacro

LonoMacro bill of materials (BOM)

21 components, 8 distinct parts.

QtyPartRefs
3
XIAO-nRF52840-SMD
U1, U2, U3
1
Conn_01x04_Pin
J1
3
Conn_01x02_Socket
J2, J3, J4
4
SW_Push
SW1, SW2, SW3, SW4
3
SW_Push
SW5, SW7, SW8
1
RotaryEncoder_Switch
SW6
3
LED
D1, D2, D3
3
220
R1, R2, R3

LonoMacro design files

The KiCad project lives in the anasluqman089/LonoMacro repository on GitHub; these links point at the commit this page was built from.

LonoMacro: common questions

What microcontroller does the LonoMacro use?

The LonoMacro is built around the XIAO-nRF52840-SMD, from the Nordic nRF family.

How big is the LonoMacro PCB?

The LonoMacro measures 82 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LonoMacro?

21 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the LonoMacro design files?

From the anasluqman089/LonoMacro repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LonoMacro design in my own project?

Yes, under the terms of its CC0-1.0 license, which anasluqman089 chose for the repository.

Can I test firmware for the LonoMacro without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

Similar boards