HardLabs

Mazokchist

anasluqman089·Mazokchist·PCB/Mazokchist.kicad_pcb

Mazokchist PCB layout, top view — open source ESP32 board by anasluqman089

About the Mazokchist PCB

Mazokchist is an open source ESP32 PCB design by anasluqman089, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 89.5 × 38 mm, with 3 components from 3 distinct parts.

Its main chip is the XIAO-ESP32-C6-SMD, from the ESP32 family. Other key parts include the module_bme680. By type, the board carries 2 ICs and 1 connector.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

What is Mazokchist you might ask? it is a small environmental monitor built around the Seeed XIAO ESP32-C6. A BME680 sensor measures temperature, humidity, pressure and gas resistance and sends the readings over I2C to the XIAO, which displays them on a Waveshare 2.9" e-Paper scr

What is Mazokchist you might ask? it is a small environmental monitor built around the Seeed XIAO ESP32-C6. A BME680 sensor measures temperature, humidity, pressure and gas resistance and sends the readings over I2C to the XIAO, which displays them on a Waveshare 2.9" e-Paper screen.

Why the name is Mazokchist? It is just a msde up name no need to know the meaning.

Mazokchist, from the project README
From the project README

Main components on the Mazokchist

XIAO-ESP32-C6-SMDmodule_bme680

Mazokchist bill of materials (BOM)

3 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-C6-SMD
U1
1
module_bme680
U2
1
Conn_01x08
J1

Mazokchist design files

The KiCad project lives in the anasluqman089/Mazokchist repository on GitHub; these links point at the commit this page was built from.

Mazokchist: common questions

What microcontroller does the Mazokchist use?

The Mazokchist is built around the XIAO-ESP32-C6-SMD, from the ESP32 family.

How big is the Mazokchist PCB?

The Mazokchist measures 89.5 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mazokchist?

3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mazokchist design files?

From the anasluqman089/Mazokchist repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Mazokchist design in my own project?

Yes, under the terms of its CC0-1.0 license, which anasluqman089 chose for the repository.

Can I test firmware for the Mazokchist without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards