HardLabs

Ani keeb

Anayjain1129·PCB-Files·ani-keeb/ani_keeb/ani_keeb.kicad_pcb

Ani keeb PCB layout, top view — open source RP2040/RP2350 board by Anayjain1129

About the Ani keeb PCB

Ani keeb is an open source RP2040/RP2350 PCB design by Anayjain1129, published on GitHub. It is a 2-layer board measuring 355.5 × 138 mm, with 158 components from 10 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 79 diodes, 78 switches and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

all the hardware pcb files that i have on my disk

Main components on the Ani keeb

RaspberryPi_Pico

Ani keeb bill of materials (BOM)

158 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
63
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +55
1
SW_Push
SW27
2
SW_Push
SW28, SW41
1
SW_Push
SW42
2
SW_Push
SW54, SW55
1
SW_Push
SW66
7
SW_Push
SW68, SW69, SW70, SW72, SW73, SW74, SW75
1
SW_Push
SW71
79
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +71

Ani keeb design files

The KiCad project lives in the Anayjain1129/PCB-Files repository on GitHub; these links point at the commit this page was built from.

Ani keeb: common questions

What microcontroller does the Ani keeb use?

The Ani keeb is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Ani keeb PCB?

The Ani keeb measures 355.5 × 138 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ani keeb?

158 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Ani keeb design files?

From the Anayjain1129/PCB-Files repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Ani keeb design in my own project?

The repository has no license, so all rights stay with Anayjain1129. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ani keeb without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in PCB-Files

Similar boards