HardLabs

Chaney Board

Anayjain1129·PCB-Files·Chaney_Board/Chaney_Board.kicad_pcb

Chaney Board layout, top view — open source RP2040/RP2350 board by Anayjain1129

About the Chaney Board

Chaney Board is an open source RP2040/RP2350 PCB design by Anayjain1129, published on GitHub. It is a 2-layer board measuring 345.2 × 129.2 mm, with 165 components from 10 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 82 switches, 82 diodes and 1 module.

From the project

all the hardware pcb files that i have on my disk

Main components on the Chaney Board

RaspberryPi_Pico

Chaney Board bill of materials (BOM)

165 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
70
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +62
1
SW_Push
SW27
2
SW_Push
SW29, SW42
2
SW_Push
SW44, SW69
2
SW_Push
SW56, SW58
3
SW_Push
SW72, SW73, SW74
1
SW_Push
SW75
1
RotaryEncoder_Switch
SW82
82
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +74

Chaney Board design files

The KiCad project lives in the Anayjain1129/PCB-Files repository on GitHub; these links point at the commit this page was built from.

Chaney Board: common questions

What microcontroller does the Chaney Board use?

The Chaney Board is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Chaney Board?

The Chaney Board measures 345.2 × 129.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Chaney Board?

165 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Chaney Board design files?

From the Anayjain1129/PCB-Files repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Chaney Board design in my own project?

The repository has no license, so all rights stay with Anayjain1129. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Chaney Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in PCB-Files

Similar boards