HardLabs

K-Board

Anayjain1129·PCB-Files·K-Board/K-Board.kicad_pcb

K-Board layout, top view — open source RP2040/RP2350 board by Anayjain1129

About the K-Board

K-Board is an open source RP2040/RP2350 PCB design by Anayjain1129, published on GitHub. It is a 2-layer board measuring 323.1 × 161.3 mm, with 170 components from 9 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 85 diodes, 84 switches and 1 module.

From the project

all the hardware pcb files that i have on my disk

Main components on the K-Board

RaspberryPi_Pico

K-Board bill of materials (BOM)

170 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
73
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +65
1
SW_Push
SW30
2
SW_Push
SW32, SW45
2
SW_Push
SW47, SW72
2
SW_Push
SW59, SW61
3
SW_Push
SW75, SW76, SW77
1
SW_Push
SW78
85
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +77

K-Board design files

The KiCad project lives in the Anayjain1129/PCB-Files repository on GitHub; these links point at the commit this page was built from.

K-Board: common questions

What microcontroller does the K-Board use?

The K-Board is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the K-Board?

The K-Board measures 323.1 × 161.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the K-Board?

170 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the K-Board design files?

From the Anayjain1129/PCB-Files repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the K-Board design in my own project?

The repository has no license, so all rights stay with Anayjain1129. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the K-Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in PCB-Files

Similar boards