Stm32 flight controller hw
andrea-cirillo·stm32_flight_controller_hw·01 - FC_KiCadProj/DimaQuadFC_C2.kicad_pcb
About the Stm32 flight controller hw PCB
Stm32 flight controller hw is an open source STM32 PCB design by andrea-cirillo, published on GitHub. It is a 4-layer board measuring 40 × 40 mm, with 96 components from 53 distinct parts.
Its main chip is the STM32WB55CGU6, from the STM32 family. Other key parts include the LSM6DSV16X, LIS2MDL, LPS22HB, LD39130SPUR and STC4054GR. By type, the board carries 33 resistors, 29 capacitors, 10 diodes, 8 ICs, 6 transistors and 4 modules.
It belongs with the robotics & motion and rf & radio designs in this gallery.
From the project
KiCad 7 project (it also opens in KiCad 8/9). Rev C2 keeps the rev C outline, mounting, stack-up, power path, motor stages, sensor layout and pogo grid, and replaces the parts that are not available:
KiCad 7 project (it also opens in KiCad 8/9). Rev C2 keeps the rev C outline, mounting, stack-up, power path, motor stages, sensor layout and pogo grid, and replaces the parts that are not available:
Kept from rev C, as decided for C2: - Battery. On-board USB-C charging (STC4054) and battery solder pads J2. A BT2.0 / PH2.0 pigtail on the pads gives a quick-swap connector without board space. - Motors. Solder pads. - Programming. Pogo grid on the bottom. - Barometer. Kept for altitude hold. No GPS: an external GPS (UART) or optical-flow sensor (I2C) can be added later on expansion pads.
Main components on the Stm32 flight controller hw
Stm32 flight controller hw bill of materials (BOM)
96 components, 53 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LSM6DSV16X | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U1 |
| 1 | STM32WB55CGU6 | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U2 |
| 1 | LIS2MDL IIS2MDC | LGA-12_2x2mm_P0.5mm | U3 |
| 1 | LPS22HB | ST_HLGA-10_2x2mm_P0.5mm_LayoutBorder3x2y | U4 |
| 1 | LD39130SPUR | DFN-6_1.3x1.2mm_P0.4mm | U5 |
| 1 | STC4054GR | TSOT-23-5 | U6 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U7 |
| 1 | MLPF-WB55-01E3 | ST_MLPF-WB55-01E3_CSP-6 | U8 |
| 4 | coreless 8520 | MotorPads_1x02_SMD | M1, M2, M3, M4 |
| 4 | AON7524 | Vishay_PowerPAK_1212-8_Single | Q1, Q2, Q3, Q4 |
| 1 | AO3401A | SOT-23 | Q5 |
| 1 | 2N7002DW | SOT-363_SC-70-6 | Q6 |
| 1 | 32MHZ 32MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | USB-C (HRO TYPE-C-31-M-12) | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | BATT 1S | BattPads_1x02_SMD | J2 |
| 1 | 2450AT18A0100001E | Johanson_2450AT18x100 | AE1 |
| 2 | white | LED_0402_1005Metric | D1, D2 |
| 2 | red | LED_0402_1005Metric | D3, D4 |
| 4 | STPS3L45AF | D_SMAflat | D5, D6, D7, D8 |
| 1 | PMEG2010AEH | D_SOD-123F | D9 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | green | LED_0402_1005Metric | D10 |
| 1 | 2.2uH | L_0805_2012Metric | L1 |
| 1 | 10nH | L_0402_1005Metric | L2 |
| 1 | 470uF 6.3V polymer | CP_EIA-7343-31_Kemet-D | C1 |
| 4 | 10uF 10V | C_0603_1608Metric | C2, C3, C4, C5 |
| 1 | 100uF 6.3V | C_1206_3216Metric | C6 |
| 2 | 4.7UF 4.7uF | C_0603_1608Metric | C7, C9 |
| 2 | 1uF | C_0402_1005Metric | C8, C22 |
| 1 | 1uF 10V | C_0402_1005Metric | C10 |
| 1 | 4.7uF 10V | C_0603_1608Metric | C11 |
| 5 | 100NF 100nF | C_0402_1005Metric | C12, C16, C17, C19, C21 |
| 7 | 100nF | C_0402_1005Metric | C14, C15, C23, C24, C25, C26, C28 |
| 1 | 220NF 220nF | C_0402_1005Metric | C18 |
| 1 | 10uF 6.3V | C_0603_1608Metric | C20 |
| 1 | 100pF | C_0402_1005Metric | C27 |
| 1 | 4.7uF | C_0402_1005Metric | C29 |
| 1 | DNP | C_0402_1005Metric | C36 |
| 1 | 1R | R_0603_1608Metric | R1 |
| 9 | 100K 100k | R_0402_1005Metric | R2, R10, R11, R24, R25, R26, R27, R32 +1 |
| 1 | 287k 1% | R_0402_1005Metric | R3 |
| 1 | 100k 1% | R_0402_1005Metric | R4 |
| 1 | 3.3k 1% | R_0402_1005Metric | R5 |
| 1 | 1k | R_0402_1005Metric | R6 |
| 1 | 1R | R_0402_1005Metric | R7 |
| 2 | 470k 1% | R_0402_1005Metric | R8, R9 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R12, R13 |
| 1 | 10k | R_0402_1005Metric | R14 |
| 2 | 2.2K 2.2k | R_0402_1005Metric | R15, R16 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R17, R18 |
| 4 | 22R | R_0402_1005Metric | R20, R21, R22, R23 |
| 2 | 220R | R_0402_1005Metric | R28, R29 |
| 2 | 470R | R_0402_1005Metric | R30, R31 |
| 1 | 0R | R_0402_1005Metric | R34 |
Stm32 flight controller hw design files
The KiCad project lives in the andrea-cirillo/stm32_flight_controller_hw repository on GitHub; these links point at the commit this page was built from.
Stm32 flight controller hw: common questions
What microcontroller does the Stm32 flight controller hw use?
The Stm32 flight controller hw is built around the STM32WB55CGU6, from the STM32 family.
How big is the Stm32 flight controller hw PCB?
The Stm32 flight controller hw measures 40 × 40 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Stm32 flight controller hw?
96 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stm32 flight controller hw design files?
From the andrea-cirillo/stm32_flight_controller_hw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Stm32 flight controller hw design in my own project?
The repository has no license, so all rights stay with andrea-cirillo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32 flight controller hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k