4 open source boards using the LD39130SPUR

Real designs built with the LD39130SPUR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The LD39130SPUR in open source designs

The gallery holds 4 open source boards using the LD39130SPUR from 4 GitHub repositories; a typical one measures about 40.8 × 40.8 mm and carries around 97 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is ACwing FC A by ACwing-UAV.

Microcontrollers on boards using the LD39130SPUR

What boards using the LD39130SPUR are built for

LD39130SPUR: common questions

Where can I find a LD39130SPUR reference design?

Each of the 4 boards on this page is a real design using the LD39130SPUR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LD39130SPUR?

The MLPF-WB55-01E3, STM32WB55CGU6, USBLC6-2SC6, IIS2MDCTR and LDK130PU-R appear in the most repositories here.

Which microcontrollers do boards using the LD39130SPUR use?

Most are built on STM32 (4).

How big is a typical board using the LD39130SPUR?

The median is 40.8 × 40.8 mm, and 0% are two-layer designs.

What is the most popular open source board using the LD39130SPUR?

By GitHub stars, ACwing FC A by ACwing-UAV, with 0 stars.

Can I simulate one of these boards using the LD39130SPUR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part