9 open source boards using the LSM6DSV16X
Real designs built with the LSM6DSV16X, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Stm32 flight controller hw
andrea-cirillo
40 × 40 mm96 parts4LNo license0RP2040/RP2350
ESP-HI-PLUS
dyu134
58 × 35 mm83 parts4LNo license0Unoq hat
Leif-Rydenfalk
68.6 × 53.3 mm77 parts4LApache-2.00STM32
Stm32logger
Birb-jpg
30 × 30 mm59 parts2LNo license0Sim7070g imu
jrborbars
62 × 54 mm45 parts4LMIT0Swipe smart ring
Curtisflo
38 × 10 mm30 parts2LMIT0SmartRingUsayeed
AbdullahUsayeed
38 × 10 mm30 parts2LMIT0- schematic only · 30 parts
Lidar roomscanner
hellosamblack
30 partsNo license0 RP2040/RP2350
Robot
dyu134
70.1 × 100 mm78 parts2LNo license0
How designs wire the LSM6DSV16X
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LSM6DSV16X connects to, and the resistors, capacitors and other passives placed on it.
- The VDD_8 pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 1 µF).
- The OCS_AUX_10 pin is left unconnected on 6 of 7 designs.
- The SCL_13 pin has a pull-up to VBAT on 5 of 7 designs, most often 10 kΩ (then 2.2 kΩ).
- The VDDIO_5 pin has a decoupling capacitor on 3 of 7 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDIO_5pin 5 | Connected to: 3.3V 57% · not connected 43% |
|
| GND_6pin 6 | Connected to: GND 86% | — |
| GND_7pin 7 | Connected to: GND 86% | — |
| VDD_8pin 8 | Connected to: 3.3V 86% |
|
| OCS_AUX_10pin 10 | Connected to: Not connected 86% | — |
| SCL_13pin 13 | Connected to: ANNA-B112-02B 29% |
|
| SDA_14pin 14 | Connected to: Signal 71% · VBAT 29% |
|
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SmartRingUsayeed by AbdullahUsayeed, Stm32 flight controller hw by andrea-cirillo, Stm32logger by Birb-jpg and Swipe smart ring by Curtisflo.
The LSM6DSV16X in open source designs
The gallery holds 9 open source boards using the LSM6DSV16X from 8 GitHub repositories; a typical one measures about 49 × 37.5 mm and carries around 59 components.
50% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is Stm32 flight controller hw by andrea-cirillo.
Parts used alongside the LSM6DSV16X
Microcontrollers on boards using the LSM6DSV16X
What boards using the LSM6DSV16X are built for
LSM6DSV16X: common questions
Where can I find a LSM6DSV16X reference design?
Each of the 9 boards on this page is a real design using the LSM6DSV16X. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LSM6DSV16X VDD_8 pin?
The VDD_8 pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the LSM6DSV16X.
How is the LSM6DSV16X OCS_AUX_10 pin connected?
The OCS_AUX_10 pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the LSM6DSV16X.
What pull-up resistor is used on the LSM6DSV16X SCL_13 pin?
The SCL_13 pin has a pull-up to VBAT on 5 of 7 designs, most often 10 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 7 open source designs using the LSM6DSV16X.
What parts are used alongside the LSM6DSV16X?
The ANNA-B112-02B, LIS2MDL and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the LSM6DSV16X use?
Most are built on RP2040/RP2350 (2) and STM32 (2).
How big is a typical board using the LSM6DSV16X?
The median is 49 × 37.5 mm, and 50% are two-layer designs.
What is the most popular open source board using the LSM6DSV16X?
By GitHub stars, Stm32 flight controller hw by andrea-cirillo, with 0 stars.
Can I simulate one of these boards using the LSM6DSV16X before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.