Lira
AndreaGiulianini·lira·production/kicad/lira.kicad_pcb
About the Lira PCB
Lira is an open source PCB design by AndreaGiulianini, published on GitHub under the MIT license. It is a 2-layer board measuring 334.6 × 100.2 mm, with 200 components from 93 distinct parts.
Other key parts include the E73-2G4M08S1C, MCP73831, AP2112K-3.3, USBLC6-2SC6 and CH334P. By type, the board carries 64 diodes, 59 switches, 37 capacitors, 22 resistors, 8 ICs and 4 inductors.
It belongs with the keyboards, audio and iot & wireless designs in this gallery.
From the project
57-key 40% + numpad keyboard: Bluetooth/USB-C, hot-swap MX, RMK/Vial, and a built-in USB sound card (3.5 mm headset jack). Generated from source with KiCad.
57 keys: numpad on the left + Agar mini 40% with a split 3u + 3u spacebar, built-in USB sound card.
- 57 hot-swap MX switches, Bluetooth + USB-C (Ebyte E73 nRF52840 module), LiPo battery, RMK firmware with Vial. - Built-in USB sound card: a 3.5 mm headset jack at the back (headphones + microphone, CTIA plugs) with a headphone amplifier, behind a USB hub; over the USB cable the computer sees a keyboard and a USB headset (no drivers). The firmware powers the sound card only in USB mode: in Bluetooth mode there is none, even with the cable plugged in. - Works without a battery too, from the USB…

Main components on the Lira
Lira bill of materials (BOM)
200 components, 93 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | E73-2G4M08S1C | WIRELM-SMD_E73-2G4M08S1C | U1 |
| 1 | MCP73831 | SOT-23-5 | U2 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | CH334P | WCH_QFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U5 |
| 1 | CM108B | LQFP-48_7x7mm_P0.5mm | U6 |
| 1 | TPA6132A2 | WQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm | U7 |
| 1 | TPS22919 | SOT-363_SC-70-6 | U8 |
| 1 | SI2301CDS | SOT-23 | Q1 |
| 1 | 32.768KHZ 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 12MHZ 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | C165948 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | C295747 battery JST-PH | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | PJ-320D-4A | Jack_3.5mm_KoreanHropartsElec_PJ-320D-4A_Horizontal | J3 |
| 1 | 7 | SW_Hotswap_Kailh_MX_1.00u | SW1 |
| 1 | 8 | SW_Hotswap_Kailh_MX_1.00u | SW2 |
| 1 | 9 | SW_Hotswap_Kailh_MX_1.00u | SW3 |
| 1 | − | SW_Hotswap_Kailh_MX_1.00u | SW4 |
| 1 | esc | SW_Hotswap_Kailh_MX_1.00u | SW5 |
| 1 | Q | SW_Hotswap_Kailh_MX_1.00u | SW6 |
Show 73 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | W | SW_Hotswap_Kailh_MX_1.00u | SW7 |
| 1 | E | SW_Hotswap_Kailh_MX_1.00u | SW8 |
| 1 | R | SW_Hotswap_Kailh_MX_1.00u | SW9 |
| 1 | T | SW_Hotswap_Kailh_MX_1.00u | SW10 |
| 1 | Y | SW_Hotswap_Kailh_MX_1.00u | SW11 |
| 1 | U | SW_Hotswap_Kailh_MX_1.00u | SW12 |
| 1 | I | SW_Hotswap_Kailh_MX_1.00u | SW13 |
| 1 | O | SW_Hotswap_Kailh_MX_1.00u | SW14 |
| 1 | P | SW_Hotswap_Kailh_MX_1.00u | SW15 |
| 1 | \ | SW_Hotswap_Kailh_MX_1.00u | SW16 |
| 1 | delete | SW_Hotswap_Kailh_MX_1.00u | SW17 |
| 1 | 4 | SW_Hotswap_Kailh_MX_1.00u | SW18 |
| 1 | 5 | SW_Hotswap_Kailh_MX_1.00u | SW19 |
| 1 | 6 | SW_Hotswap_Kailh_MX_1.00u | SW20 |
| 1 | + | SW_Hotswap_Kailh_MX_1.00u | SW21 |
| 1 | tab | SW_Hotswap_Kailh_MX_1.25u | SW22 |
| 1 | A | SW_Hotswap_Kailh_MX_1.00u | SW23 |
| 1 | S | SW_Hotswap_Kailh_MX_1.00u | SW24 |
| 1 | D | SW_Hotswap_Kailh_MX_1.00u | SW25 |
| 1 | F | SW_Hotswap_Kailh_MX_1.00u | SW26 |
| 1 | G | SW_Hotswap_Kailh_MX_1.00u | SW27 |
| 1 | H | SW_Hotswap_Kailh_MX_1.00u | SW28 |
| 1 | J | SW_Hotswap_Kailh_MX_1.00u | SW29 |
| 1 | K | SW_Hotswap_Kailh_MX_1.00u | SW30 |
| 1 | L | SW_Hotswap_Kailh_MX_1.00u | SW31 |
| 1 | ; | SW_Hotswap_Kailh_MX_1.00u | SW32 |
| 1 | return | SW_Hotswap_Kailh_MX_1.75u | SW33 |
| 1 | 1 | SW_Hotswap_Kailh_MX_1.00u | SW34 |
| 1 | 2 | SW_Hotswap_Kailh_MX_1.00u | SW35 |
| 1 | 3 | SW_Hotswap_Kailh_MX_1.00u | SW36 |
| 1 | enter | SW_Hotswap_Kailh_MX_2.00u_90deg | SW37 |
| 1 | shift | SW_Hotswap_Kailh_MX_1.75u | SW38 |
| 1 | Z | SW_Hotswap_Kailh_MX_1.00u | SW39 |
| 1 | X | SW_Hotswap_Kailh_MX_1.00u | SW40 |
| 1 | C | SW_Hotswap_Kailh_MX_1.00u | SW41 |
| 1 | V | SW_Hotswap_Kailh_MX_1.00u | SW42 |
| 1 | B | SW_Hotswap_Kailh_MX_1.00u | SW43 |
| 1 | N | SW_Hotswap_Kailh_MX_1.00u | SW44 |
| 1 | M | SW_Hotswap_Kailh_MX_1.00u | SW45 |
| 1 | , | SW_Hotswap_Kailh_MX_1.00u | SW46 |
| 2 | . | SW_Hotswap_Kailh_MX_1.00u | SW47, SW51 |
| 1 | shift | SW_Hotswap_Kailh_MX_1.25u | SW48 |
| 1 | fn | SW_Hotswap_Kailh_MX_1.00u | SW49 |
| 1 | 0 | SW_Hotswap_Kailh_MX_2.00u | SW50 |
| 2 | option | SW_Hotswap_Kailh_MX_1.00u | SW52, SW57 |
| 2 | ⌘ | SW_Hotswap_Kailh_MX_1.25u | SW53, SW56 |
| 2 | space | SW_Hotswap_Kailh_MX_3.00u | SW54, SW55 |
| 1 | JS102011SAQN | SW_SPDT_CK_JS102011SAQN | SW101 |
| 1 | C318884 reset | SW-SMD_4P-L5.1-W5.1-P3.70-LS6.5-TL_H1.5 | SW102 |
| 57 | 1N4148W | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +49 |
| 2 | B5819W | D_SOD-123 | D101, D104 |
| 1 | C2290 LED white | LED_0603_1608Metric | D102 |
| 1 | C2286 LED red | LED_0603_1608Metric | D103 |
| 3 | PESD5V0 | D_SOD-323 | D105, D106, D107 |
| 4 | C1002 600R@100MHz | L_0603_1608Metric | L101, L102, L103, L104 |
| 7 | 10UF 10uF | C_0603_1608Metric | C101, C103, C111, C113, C120, C121, C122 |
| 10 | 1UF 1uF | C_0603_1608Metric | C102, C108, C110, C118, C123, C126, C129, C130 +2 |
| 3 | 10NF 10nF | C_0603_1608Metric | C104, C138, C139 |
| 2 | 18PF 18pF | C_0603_1608Metric | C105, C106 |
| 3 | 4.7UF 4.7uF | C_0603_1608Metric | C107, C116, C127 |
| 6 | 100NF 100nF | C_0603_1608Metric | C109, C112, C114, C115, C117, C119 |
| 3 | 100PF 100pF | C_0603_1608Metric | C124, C125, C128 |
| 2 | 2.2UF 2.2uF | C_0603_1608Metric | C133, C134 |
| 1 | 470NF 470nF | C_0603_1608Metric | C137 |
| 3 | 100K 100k | R_0603_1608Metric | R101, R112, R117 |
| 4 | 1k | R_0603_1608Metric | R102, R107, R116, R118 |
| 6 | 10K 10k | R_0603_1608Metric | R103, R104, R120, R121, R122, R123 |
| 2 | 10M | R_0603_1608Metric | R105, R106 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R108, R109 |
| 2 | 22 | R_0603_1608Metric | R110, R111 |
| 1 | 1M | R_0603_1608Metric | R113 |
| 1 | 1.2K 1.2k | R_0603_1608Metric | R114 |
| 1 | 2.2K 2.2k | R_0603_1608Metric | R115 |
Lira design files
The KiCad project lives in the AndreaGiulianini/lira repository on GitHub; these links point at the commit this page was built from.
Lira: common questions
How big is the Lira PCB?
The Lira measures 334.6 × 100.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Lira?
200 components, from 93 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lira design files?
From the AndreaGiulianini/lira repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Lira design in my own project?
Yes, under the terms of its MIT license, which AndreaGiulianini chose for the repository.