5 open source boards using the TPS22919

Real designs built with the TPS22919, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TPS22919

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS22919 connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 100 nF).
  • The ON pin has a resistor to GND on 3 of 5 designs, most often 100 kΩ (then 1 MΩ).
  • The VOUT pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 2.2 µF).
  • The N_C pin is left unconnected on 3 of 5 designs (3.3V on 2).
VINpin 1Connected to: 3.3V 80% · a signal 20%
  • Decoupling capacitor on 100% · 1 µF (4), 100 nF (2), 47 µF (1)
GNDpin 2Connected to: GND 100%
ONpin 3Connected to: The microcontroller 40%
  • Resistor to GND on 60% · 100 kΩ (2), 1 MΩ (1)
N_Cpin 4Connected to: Not connected 60% · 3.3V 40%
QODpin 5Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 1 kΩ (2)
VOUTpin 6Connected to: Signal 60% · not connected 40%
  • Capacitor to GND on 60% · 100 nF (8), 2.2 µF (2), 10 µF (1)
  • Series resistor on 40% · 1 kΩ (2), 4.7 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EasyHive M0 by jacobron, Lira by AndreaGiulianini, Easyhive kicad by easyhive and Nrf9151-tracker by chgpalmer.

The TPS22919 in open source designs

The gallery holds 5 open source boards using the TPS22919 from 5 GitHub repositories; a typical one measures about 50.8 × 75 mm and carries around 101 components.

67% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.

The most starred is EasyHive M0 by jacobron.

Microcontrollers on boards using the TPS22919

TPS22919: common questions

Where can I find a TPS22919 reference design?

Each of the 5 boards on this page is a real design using the TPS22919. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TPS22919 VIN pin?

The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the TPS22919.

What resistor goes on the TPS22919 ON pin?

The ON pin has a resistor to GND on 3 of 5 designs, most often 100 kΩ (then 1 MΩ). Counted from the KiCad layouts of 5 open source designs using the TPS22919.

How is the TPS22919 VOUT pin connected?

The VOUT pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 5 open source designs using the TPS22919.

What parts are used alongside the TPS22919?

The ADS1232, ATSAMD21G, BQ2407X, DS18B20U and XC6220B331 appear in the most repositories here.

Which microcontrollers do boards using the TPS22919 use?

Most are built on Microchip SAM (2), AVR/Arduino (1) and Nordic nRF (1).

How big is a typical board using the TPS22919?

The median is 50.8 × 75 mm, and 67% are two-layer designs.

What is the most popular open source board using the TPS22919?

By GitHub stars, EasyHive M0 by jacobron, with 4 stars.

Can I simulate one of these boards using the TPS22919 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part