Tower
AndreHatu·MarioKart·schematics/tower.kicad_pcb
About the Tower PCB
Tower is an open source ESP32 PCB design by AndreHatu, published on GitHub under the MIT license. It is a 2-layer board measuring 100.1 × 58.2 mm, with 27 components from 15 distinct parts.
Its main chip is the ESP32-SOLO-1, from the ESP32 family. By type, the board carries 8 resistors, 7 capacitors, 5 connectors, 2 transistors, 2 switches and 2 diodes.
It belongs with the iot & wireless designs in this gallery.
From the project
Senior Design Project using ESP32s to remake Mario Kart with RC Cars
ECE477 Senior Design at Purdue University.
Inside the menuconfig, you might need to set the option in case your ESP32 only has one core (like the ones we are using for the project) Then you can build and flash with
Main components on the Tower
Tower bill of materials (BOM)
27 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-SOLO-1 | ESP32-WROOM-32 | IC1 |
| 2 | SS8050-G | SOT95P240X115-3N | Q1, Q2 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | Conn_01x06 | PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05 | PinSocket_1x05_P2.54mm_Vertical | J3 |
| 1 | SD_Card | SD_Kyocera_145638109211859+ | J4 |
| 1 | Conn_02x10_Odd_Even | PinSocket_2x10_P2.54mm_Vertical | J5 |
| 2 | SW_Push | SW_SPST_CK_KXT3 | SW1, SW2 |
| 1 | BAT760-7 | SOD2513X120N | D1 |
| 1 | LED | APHCM2012QBCDF01 | D2 |
| 2 | 0.1uF | C_0805_2012Metric | C1, C2 |
| 4 | 100nF | C_0805_2012Metric | C3, C5, C6, C7 |
| 1 | 22uF | C_0805_2012Metric | C4 |
| 6 | 10k | R_0805_2012Metric | R1, R2, R3, R4, R5, R8 |
| 2 | 0 | R_0805_2012Metric | R6, R7 |
Tower design files
The KiCad project lives in the AndreHatu/MarioKart repository on GitHub; these links point at the commit this page was built from.
- Layoutschematics/tower.kicad_pcb
- Schematicschematics/tower.kicad_sch
Tower: common questions
What microcontroller does the Tower use?
The Tower is built around the ESP32-SOLO-1, from the ESP32 family.
How big is the Tower PCB?
The Tower measures 100.1 × 58.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tower?
27 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tower design files?
From the AndreHatu/MarioKart repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tower design in my own project?
Yes, under the terms of its MIT license, which AndreHatu chose for the repository.
Can I test firmware for the Tower without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in MarioKart
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k