ESP32-S3-Flight-Controller

andrewromanenco·ESP32-S3-Flight-Controller

ESP32-S3-Flight-Controller PCB layout, top view — open source ESP32 board by andrewromanenco

About the ESP32-S3-Flight-Controller PCB

ESP32-S3-Flight-Controller is an open source ESP32 PCB design by andrewromanenco, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 60 × 30 mm, with 51 components from 35 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the B3U-1000P, TPS73733DCQR, LP5907MFX-3.3/NOPB, NUP2201MR6T1G and ICM-42686-P. By type, the board carries 15 connectors, 13 resistors, 11 capacitors, 7 ICs and 4 diodes.

It belongs with the sensors, robotics & motion and usb & debug tools designs in this gallery.

From the project

Flight controller based on ESP32-S3; kicad project

A flight-controller board built around the ESP32-S3-WROOM-1-N16R8 module and an ICM-42686-P six-axis IMU. The repository contains the complete KiCad design files and manufacturing outputs needed to inspect, modify, or assemble the board.

- ESP32-S3-WROOM-1-N16R8 module with 16 MB flash and 8 MB PSRAM - ICM-42686-P three-axis gyroscope and three-axis accelerometer - USB-C connection for power and native USB programming - 5 V input with onboard 3.3 V regulation - JST-GH connections for SPI, I2C, UART, power, and GPIO - BOOT and RESET controls - Four-layer PCB design

ESP32-S3-Flight-Controller, from the project README
From the project README

Main components on the ESP32-S3-Flight-Controller

ESP32-S3-Flight-Controller bill of materials (BOM)

51 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
B3U-1000P
U1, U6
1
TPS73733DCQR
U2
1
LP5907MFX-3.3/NOPB
LP5907MFX-3.3
U3
1
ESP32-S3-WROOM-1-N16R8
U4
1
NUP2201MR6T1G
U5
1
ICM-42686-P
U7
1
CONN_01X05
Conn_01x05
J1
1
USB4105-GF-A-120
USB4105-GF-A
J2
2
CONN_01X05
Conn_01x05
J3, J19
2
spi
J4, J5
1
UART1
uart1
J6
2
I2C_SW
i2c_sw
J7, J9
2
I2C
i2c
J8, J11
1
CONN_01X02
Conn_01x02
J10
1
UART2
uart2
J12
1
5v power
J13
1
UART0
uart0
J14
1
5-in
+5.0
1
SML-D12U1WT86
LED
D2
1
SMAJ6.0A
D3
Show 15 more
QtyPartRefs
2
SS34LW
SS34
D4, D5
1
CC0603KRX7R7BB105
1uF
C1
2
CL21A106KPFNNNE
10uF
C2, C8
1
CL21B106KOQNNNE
10 uF
C3
1
CL31B226KQHNNNE
22uF
C4
2
CL10B225KP8NFNC
2.2uF
C5, C10
2
CL10B104KO8NNNC
100nF
C6, C11
1
CL10B103KO8WPNC
10nF
C7
1
C0603C103K5RACTU
10nF
C9
4
RM06F1002CT
10k
R1, R8, R11, R12
1
CRGCQ0603F470R
470
R2
3
RC0603JR-070RL
0
R3, R4, R13
2
RMCF0603FT4K70
4.7k
R5, R9
2
RC0603FR-075K1L
5.1k
R6, R7
1
MICROSMD110F-2
R10

ESP32-S3-Flight-Controller design files

The KiCad project lives in the andrewromanenco/ESP32-S3-Flight-Controller repository on GitHub; these links point at the commit this page was built from.

ESP32-S3-Flight-Controller: common questions

What microcontroller does the ESP32-S3-Flight-Controller use?

The ESP32-S3-Flight-Controller is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.

How big is the ESP32-S3-Flight-Controller PCB?

The ESP32-S3-Flight-Controller measures 60 × 30 mm, has 4 copper layers and is 1.561 mm thick.

How many components are on the ESP32-S3-Flight-Controller?

51 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32-S3-Flight-Controller design files?

From the andrewromanenco/ESP32-S3-Flight-Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32-S3-Flight-Controller design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which andrewromanenco chose for the repository.

Can I test firmware for the ESP32-S3-Flight-Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards