2 open source boards using the TPS73733DCQR

Real designs built with the TPS73733DCQR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TPS73733DCQR in open source designs

The gallery holds 2 open source boards using the TPS73733DCQR from 2 GitHub repositories; a typical one measures about 90.3 × 150 mm and carries around 187 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is Rabbit 2.0 body board (deck 2) by seralexeev.

Microcontrollers on boards using the TPS73733DCQR

What boards using the TPS73733DCQR are built for

TPS73733DCQR: common questions

Where can I find a TPS73733DCQR reference design?

Each of the 2 boards on this page is a real design using the TPS73733DCQR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TPS73733DCQR use?

Most are built on ESP32 (1) and STM32 (1).

How big is a typical board using the TPS73733DCQR?

The median is 90.3 × 150 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS73733DCQR?

By GitHub stars, Rabbit 2.0 body board (deck 2) by seralexeev, with 1 stars.

Can I simulate one of these boards using the TPS73733DCQR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part