Engine meter
andrewsargent2311-web·Engine_meter·Engine_monitor_V1/_restore_backup_2026-09-02T17-29-26-343/Engine_monitor_V1.kicad_pcb
About the Engine meter PCB
Engine meter is an open source PCB design by andrewsargent2311-web, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 88.3 × 80.3 mm, with 44 components from 18 distinct parts.
Other key parts include the nice_nano, LMV331IDBVR and MAX31856MUD+. By type, the board carries 15 resistors, 14 capacitors, 8 diodes, 4 ICs, 2 crystals and 1 connector.
It belongs with the power & battery and iot & wireless designs in this gallery.
From the project
nRF52840 engine meter
A small, battery-powered engine monitor for a paramotor. It measures RPM, CHT and EGT, and sends them over Bluetooth LE as NMEA-style sentences to Gaggle or the paraglidevarioESP32 flight computer. It also reports its own battery percentage.
It was designed and tested on a Moster 185 (single-cylinder two-stroke), but it should work on any engine with a spark-ignition lead and a thermocouple-instrumented head or exhaust.

Main components on the Engine meter
Engine meter bill of materials (BOM)
44 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | nice_nano | nice_nano | U1 |
| 1 | LMV331IDBVR LMV331 | SOT-23-5 | U2 |
| 2 | MAX31856MUD+ MAX31856 | TSSOP14 | U3, U4 |
| 2 | 3.5mm term | TERMBLOCK_1X2-3.5MM | X1, X2 |
| 1 | RPM_PICKUP | PinHeader_1x01_P2.54mm_Vertical | J1 |
| 6 | 1N4148 | SOD-323 | D1, D2, D3, D4, D7, D8 |
| 2 | BAT54W | D_SOD-123 | D5, D6 |
| 2 | 0.01uF | 0805_10MGAP | C1, C10 |
| 6 | 0.1uF | 0805-NO | C2, C4, C5, C11, C12, C14 |
| 2 | 0.01uF | 0805-NO | C3, C9 |
| 2 | 10u | C_0805_2012Metric | C6, C13 |
| 1 | 10nF | C_0805_2012Metric | C7 |
| 1 | 100nF | C_0805_2012Metric | C8 |
| 4 | 100 | 0805-NO | R1, R2, R11, R12 |
| 6 | 10K | 0805-NO | R3, R4, R5, R13, R14, R15 |
| 1 | 22k | R_0805_2012Metric | R6 |
| 3 | 10k | R_0805_2012Metric | R7, R8, R9 |
| 1 | 1M | R_0805_2012Metric | R10 |
Engine meter design files
The KiCad project lives in the andrewsargent2311-web/Engine_meter repository on GitHub; these links point at the commit this page was built from.
Engine meter: common questions
How big is the Engine meter PCB?
The Engine meter measures 88.3 × 80.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Engine meter?
44 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Engine meter design files?
From the andrewsargent2311-web/Engine_meter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Engine meter design in my own project?
Yes, under the terms of its GPL-3.0 license, which andrewsargent2311-web chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k