5 open source boards using the LMV331IDBVR

Real designs built with the LMV331IDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the LMV331IDBVR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LMV331IDBVR connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 4 has a series resistor on 5 of 5 designs, most often 10 kΩ (then 4.7 MΩ).
  • The V-_2 pin is tied to GND on 5 of 5 designs.
  • The +_1 pin has a series resistor on 4 of 5 designs, most often 4.7 MΩ (then 10 kΩ).
  • The V+_5 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF).
+_1pin 1Connected to: Signal 80% · 0.7V 20%
  • Series resistor on 80% · 4.7 MΩ (1), 10 kΩ (1), 22 kΩ (1)
  • Capacitor to GND on 40% · 10 nF (1), 1 nF (1)
  • Resistor to GND on 40% · 10 kΩ (2)
V-_2pin 2Connected to: GND 100%
-_3pin 3Connected to: Signal 80% · VREF_P 20%
  • Capacitor to GND on 60% · 100 nF (3)
  • Resistor to GND on 60% · 10 kΩ (2)
  • Series resistor on 40% · 10 kΩ (2)
Pin 4Connected to: Signal 100%
  • Series resistor on 100% · 10 kΩ (3), 4.7 MΩ (1), 1 MΩ (1)
  • Pull-up to 5V on 60% · 10 kΩ (2), 4.7 kΩ (1)
V+_5pin 5Connected to: 5V 60% · a signal 40%
  • Decoupling capacitor on 80% · 100 nF (4), 1 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bx tacho by dazchi, Engine meter by andrewsargent2311-web, SCART switcher by nunosousa and Wireless charger by ocean-discovery-league.

The LMV331IDBVR in open source designs

The gallery holds 5 open source boards using the LMV331IDBVR from 5 GitHub repositories; a typical one measures about 88.3 × 80.3 mm and carries around 117 components.

80% use four copper layers or more, and 40% carry an open source license.

The most starred is Bx tacho by dazchi.

Microcontrollers on boards using the LMV331IDBVR

What boards using the LMV331IDBVR are built for

LMV331IDBVR: common questions

Where can I find a LMV331IDBVR reference design?

Each of the 5 boards on this page is a real design using the LMV331IDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the LMV331IDBVR pin 4?

Pin 4 has a series resistor on 5 of 5 designs, most often 10 kΩ (then 4.7 MΩ). Counted from the KiCad layouts of 5 open source designs using the LMV331IDBVR.

How is the LMV331IDBVR V-_2 pin connected?

The V-_2 pin is tied to GND on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the LMV331IDBVR.

What resistor goes on the LMV331IDBVR +_1 pin?

The +_1 pin has a series resistor on 4 of 5 designs, most often 4.7 MΩ (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the LMV331IDBVR.

Which microcontrollers do boards using the LMV331IDBVR use?

Most are built on ESP32 (1) and STM32 (1).

How big is a typical board using the LMV331IDBVR?

The median is 88.3 × 80.3 mm, and 20% are two-layer designs.

What is the most popular open source board using the LMV331IDBVR?

By GitHub stars, Bx tacho by dazchi, with 3 stars.

Can I simulate one of these boards using the LMV331IDBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part