Tomato
andylin08·tomato·pcb/tomato.kicad_pcb
About the Tomato PCB
Tomato is an open source ESP32 PCB design by andylin08, published on GitHub. It is a 2-layer board measuring 88.1 × 75.3 mm, with 15 components from 6 distinct parts.
Its main chip is the ESP32-C3-DevKitM-1, from the ESP32 family. By type, the board carries 6 diodes, 4 switches, 1 IC, 1 connector and 1 buzzer.
It belongs with the displays & leds designs in this gallery.
From the project
This is a pocket Pomodoro timer that displays time, date, and motivational quotes using RGB LEDs, dual OLED screens, and Cherry MX switches, all powered by an ESP32-C3. It’s designed to be compact, functional, and visually engaging.
This is a pocket Pomodoro timer that displays time, date, and motivational quotes using RGB LEDs, dual OLED screens, and Cherry MX switches, all powered by an ESP32-C3. It’s designed to be compact, functional, and visually engaging.
I made this project because I wanted a fun and personal way to stay focused during work sessions. I’ve always liked the tactile feel of mechanical keys and the glow of addressable LEDs, and this felt like a good way to bring them together into something useful. (Also I have like a bunch of unused stickers and I figured I could use them to decorate the case.)

Main components on the Tomato
Tomato bill of materials (BOM)
15 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-DevKitM-1 | ESP32-C3-DevKitM-1 | U1 |
| 1 | Conn_01x02_Pin | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | Buzzer | Buzzer_15x7.5RM7.6 | BZ1 |
| 2 | SSD1306 | JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | Brd1, Brd2 |
| 4 | SW_Push_45deg | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4 |
| 6 | SK6812MINI | LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1, D2, D3, D4, D5, D6 |
Tomato design files
The KiCad project lives in the andylin08/tomato repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/tomato.kicad_pcb
- Schematicpcb/tomato.kicad_sch
- BOMBOM.csv
Tomato: common questions
What microcontroller does the Tomato use?
The Tomato is built around the ESP32-C3-DevKitM-1, from the ESP32 family.
How big is the Tomato PCB?
The Tomato measures 88.1 × 75.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tomato?
15 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tomato design files?
From the andylin08/tomato repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tomato design in my own project?
The repository has no license, so all rights stay with andylin08. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Tomato without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k