Beal-TX
anobli·beal-hw·Beal-TX/Beal-TX.kicad_pcb
About the Beal-TX PCB
Beal-TX is an open source PCB design by anobli, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 37.1 × 56.9 mm, with 57 components from 43 distinct parts.
Other key parts include the TPSM863253RDXR, LORA-E5 LORAWAN MODULE, DRV8912QPWPRQ1 and LM5157QRTERQ1. By type, the board carries 22 capacitors, 17 resistors, 6 diodes, 5 connectors, 4 ICs and 2 inductors.
It belongs with the rf & radio, power & battery and sensors designs in this gallery.
From the project
Kicad project for a Lora valves controller
Beal-TX lives out in the field at the valves, powered by its own battery + solar supply. It receives commands over LoRa from a Beal-Rx unit and drives valve solenoids accordingly. It is a LoRa peer node — it has no wired connection to the existing controller, and only acts on commands sent by the coordinator.
The schematic is split into three sheets: I/O Ext Board Output (input.kicadsch — the sheet name is more accurate than the filename, which is a naming leftover), RadioMCU, Power.
Main components on the Beal-TX
Beal-TX bill of materials (BOM)
57 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPSM863253RDXR TPSM863253 | Texas_RDX0007A_QFN-FCMOD-7-3.3x4mm-P0.5mm_4EP | U2 |
| 1 | LORA-E5 LORAWAN MODULE LoRa-E5 | LoRa-E5 | U5 |
| 1 | DRV8912QPWPRQ1 | HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.4x7.8mm_Mask2.4x4.68mm_ThermalVias | U6 |
| 1 | LM5157QRTERQ1 LM5157-Q1 | WQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias | U150 |
| 1 | CONMHF1-SMD-T | CONMHF1SMDT | J1 |
| 2 | Conn_02x04_Odd_Even | PinHeader_2x04_P1.00mm_Vertical_SMD | J3, J4 |
| 1 | UJ20-C-H-G-MSMT-4B-P16-TR | UJ20CHGMSMT4BP16TR | J5 |
| 1 | 691401710006B Screw_Terminal_01x06 | 691401710006B | J6 |
| 1 | TS02-66-43-BK-160-LCR-D SW_Push | SW_PUSH_6mm | SW2 |
| 1 | SZESD9B5.0ST5G | D_SOD-923 | D1 |
| 4 | led red 1206 LED | LED_0603_1608Metric | D3, D4, D7, D15 |
| 1 | SS34-E3/57T | D_SMB | D6 |
| 1 | RC0603FR-100RL 0 | L_0603_1608Metric | L2 |
| 1 | 744777001 1uH | L_Wuerth_WE-PD-Typ-7345 | L4 |
| 1 | GRM21BR71A225KA01L 2.2uF | C_0805_2012Metric | C1 |
| 2 | GRM31CR71C106KAC7L 10uF | C_1206_3216Metric | C2, C32 |
| 1 | GRM155R71C103KA01D 10nF | C_0402_1005Metric | C3 |
| 1 | 10uF 16V 0805 0.1uF | C_0805_2012Metric | C5 |
| 1 | C0805C106K8PACTU 10uF | C_0805_2012Metric | C6 |
| 1 | 08053C104KAT2A 0.1uF | C_0805_2012Metric | C7 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | EMK107B7105KA-T 1uF | C_0603_1608Metric | C9 |
| 1 | 4.7uF 10V 0805 4.7uF | C_0805_2012Metric | C10 |
| 1 | 0,1uF 16V 0402 0.1uF | C_0402_1005Metric | C16 |
| 2 | 0,1uF 50V 0805 0.1uF | C_0805_2012Metric | C17, C18 |
| 1 | 10uF 10V 0805 10uF | C_0805_2012Metric | C19 |
| 1 | GRM31CR71C106KAC7L 10uF | R_1206_3216Metric | C20 |
| 1 | GRM1555C1E301JA01D 300pF | C_0402_1005Metric | C21 |
| 1 | 1uF 16V 0603 1uF | C_0603_1608Metric | C25 |
| 1 | MSASL219LB5226MTNA01 23uF | C_0805_2012Metric | C27 |
| 1 | GRM155R71A104KA01D 0.1uF | C_0402_1005Metric | C28 |
| 3 | GRM155R70J103KA01D 10nF | C_0402_1005Metric | C29, C30, C31 |
| 1 | GRM155R71C104KA88D 0.1uF | C_0805_2012Metric | C33 |
| 2 | 5.1K 0402 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | CRCW040219K1FKED 19.1k | R_0402_1005Metric | R3 |
| 1 | CRCW040210K0FKED 10k | R_0402_1005Metric | R4 |
| 1 | 470 | R_0402_1005Metric | R5 |
| 4 | 10K 0402 10k | R_0402_1005Metric | R6, R10, R13, R23 |
| 3 | 470 0402 470 | R_0402_1005Metric | R7, R8, R9 |
| 1 | 1k 0402 1k | R_0402_1005Metric | R15 |
| 1 | CRCW04029K76FKED 9.76k | R_0402_1005Metric | R24 |
| 1 | CRCW040220K0FKED 20k | R_0402_1005Metric | R25 |
| 1 | CRCW04022K49FKED 2.49k | R_0402_1005Metric | R26 |
| 1 | CRCW0402953RFKED 953 | R_0402_1005Metric | R27 |
Beal-TX design files
The KiCad project lives in the anobli/beal-hw repository on GitHub; these links point at the commit this page was built from.
- LayoutBeal-TX/Beal-TX.kicad_pcb
- SchematicBeal-TX/Beal-TX.kicad_sch
Beal-TX: common questions
How big is the Beal-TX PCB?
The Beal-TX measures 37.1 × 56.9 mm, has 2 copper layers and is 1.579 mm thick.
How many components are on the Beal-TX?
57 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the Beal-TX design files?
From the anobli/beal-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Beal-TX design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which anobli chose for the repository.
More boards in beal-hw
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k