Coms Board V2

AnotherBuildCorner·Relay_Switcher·PCB's/Coms Board V2/Coms Board V2.kicad_pcb

Coms Board V2 layout, top view — open source ESP32 board by AnotherBuildCorner

About the Coms Board V2

Coms Board V2 is an open source ESP32 PCB design by AnotherBuildCorner, published on GitHub. It is a 2-layer board measuring 48.9 × 68.6 mm, with 6 components from 5 distinct parts.

Its main chip is the ESP32-DEVKITC-32E, from the ESP32 family. Other key parts include the LM7805_TO220. By type, the board carries 4 connectors and 2 ICs.

It belongs with the audio and iot & wireless designs in this gallery.

From the project

DIY Relay bypass switcher for audio applications

Are you a Guitarist/Bassist? Do you have a pedalboard that just keeps on getting more complicated?

Worried about losing the high end to the long capactive runs and buffers?

Or maybe you want the ability to control your Star-Trek level board from a small controller on your desk?

Or maybe you looked at the avaliable products, and practically fell out of your chair with the price tag?

Main components on the Coms Board V2

Coms Board V2 bill of materials (BOM)

6 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-DEVKITC-32E
U1
1
LM7805_TO220
U2
2
8P8C
J1, J3
1
CONN_01X03_SOCKET
RJ45
J2
1
CONN_01X03_SOCKET
Screw_Terminal_01x02
J4

Coms Board V2 design files

The KiCad project lives in the AnotherBuildCorner/Relay_Switcher repository on GitHub; these links point at the commit this page was built from.

Coms Board V2: common questions

What microcontroller does the Coms Board V2 use?

The Coms Board V2 is built around the ESP32-DEVKITC-32E, from the ESP32 family.

How big is the Coms Board V2?

The Coms Board V2 measures 48.9 × 68.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Coms Board V2?

6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Coms Board V2 design files?

From the AnotherBuildCorner/Relay_Switcher repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Coms Board V2 design in my own project?

The repository has no license, so all rights stay with AnotherBuildCorner. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Coms Board V2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Relay_Switcher

Similar boards