Control Board V2.1

AnotherBuildCorner·Relay_Switcher·PCB's/Control Board V2.1/Control Board V2.1.kicad_pcb

Control Board V2.1 layout, top view — open source ESP32 board by AnotherBuildCorner

About the Control Board V2.1

Control Board V2.1 is an open source ESP32 PCB design by AnotherBuildCorner, published on GitHub. It is a 2-layer board measuring 93 × 67.5 mm, with 42 components from 16 distinct parts.

Its main chip is the ESP32-DEVKITC-32E, from the ESP32 family. Other key parts include the L7805, TXS0101DBV and CD74HC4051M96. By type, the board carries 8 switches, 6 ICs, 4 connectors, 3 LEDs and 2 resistors.

It belongs with the audio and iot & wireless designs in this gallery, and the repository also holds 1 earlier revision of it.

From the project

DIY Relay bypass switcher for audio applications

Are you a Guitarist/Bassist? Do you have a pedalboard that just keeps on getting more complicated?

Worried about losing the high end to the long capactive runs and buffers?

Or maybe you want the ability to control your Star-Trek level board from a small controller on your desk?

Or maybe you looked at the avaliable products, and practically fell out of your chair with the price tag?

Main components on the Control Board V2.1

Control Board V2.1 bill of materials (BOM)

42 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-DEVKITC-32E
U1
1
L7805
U2
3
TXS0101DBV
U3, U4, U5
1
CD74HC4051M96
CD74HC4051PWR
U6
1
Power In
J1
1
LED Strip Conn
J2
2
Expansion
J3, J4
3
~
BYP1, BYP2, BYP3
1
CONN_01X06_PIN
Conn_01x06_Pin
Extras1
1
Conn_01x05_Pin
I2cScreen1
12
10k
RPD1_1, RPD1_2, RPD1_3, RPD1_4, RPD1_5, RPD1_6, RPD1_7, RPD1_8 +4
1
R
R_En_1
1
CONN_01X05_PIN
Conn_01x05_Pin
RotaryEnc1
8
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8
3
IN-PI55TATPRPGPB
LED1, LED2, LED3
2
R
R1, R2

Control Board V2.1 design files

The KiCad project lives in the AnotherBuildCorner/Relay_Switcher repository on GitHub; these links point at the commit this page was built from.

Control Board V2.1: common questions

What microcontroller does the Control Board V2.1 use?

The Control Board V2.1 is built around the ESP32-DEVKITC-32E, from the ESP32 family.

How big is the Control Board V2.1?

The Control Board V2.1 measures 93 × 67.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Control Board V2.1?

42 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Control Board V2.1 design files?

From the AnotherBuildCorner/Relay_Switcher repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Control Board V2.1 design in my own project?

The repository has no license, so all rights stay with AnotherBuildCorner. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Control Board V2.1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Relay_Switcher

Earlier revisions in the repo: Control Board v2

Similar boards