Motor-Driver-V2
anshinx·Motor-Driver-V2
About the Motor-Driver-V2 PCB
Motor-Driver-V2 is an open source STM32 PCB design by anshinx, published on GitHub. It is a 4-layer board measuring 132.5 × 118.2 mm, with 117 components from 42 distinct parts.
Its main chip is the STM32G474VETx, from the STM32 family. Other key parts include the LM7805, XC6206PxxxMR, TC4422, TJA1051T and IR2130. By type, the board carries 51 capacitors, 28 resistors, 16 connectors, 12 ICs, 6 transistors and 3 diodes.
It belongs with the robotics & motion designs in this gallery.
Main components on the Motor-Driver-V2
Motor-Driver-V2 bill of materials (BOM)
117 components, 42 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM7805 | TO-220-3_Vertical | U1, U7 |
| 1 | XC6206PxxxMR | SOT-23-3 | U2 |
| 6 | TC4422 | DIP-8_W7.62mm | U5, U6, U11, U12, U13, U14 |
| 1 | TJA1051T | SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | STM32G474VETx | LQFP-100_14x14mm_P0.5mm | U9 |
| 1 | IR2130 | DIP-28_W15.24mm | U10 |
| 6 | IAUS300N08S5N014TATMA13 | IAUS300N08S5N014TATMA | Q19, Q20, Q21, Q22, Q23, Q24 |
| 1 | 8MHz | Crystal_HC18-U_Vertical | Y1 |
| 5 | Conn_01x02 | TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal | J1, J4, J7, J8, J9 |
| 1 | +VDC | SolderWirePad_1x01_SMD_5x10mm | J2 |
| 1 | -VDC | SolderWirePad_1x01_SMD_5x10mm | J3 |
| 2 | Conn_01x03 | TerminalBlock_RND_205-00002_1x03_P5.00mm_Horizontal | J5, J6 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J10 |
| 1 | HALL INPUT | PinSocket_1x05_P2.00mm_Vertical | J12 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J13 |
| 1 | Conn_01x05 | PinSocket_1x05_P2.54mm_Vertical | J14 |
| 1 | PHASE_A | SolderWirePad_1x01_SMD_5x10mm | J15 |
| 1 | PHASE_B | SolderWirePad_1x01_SMD_5x10mm | J16 |
| 1 | PHASE_C | SolderWirePad_1x01_SMD_5x10mm | J17 |
| 3 | U1SM | D_SMA_Handsoldering | D1, D2, D3 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 16 | 100nF | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C2, C3, C6, C13, C14, C36, C37 +8 |
| 2 | 680uF | CP_Radial_D10.0mm_P5.00mm | C4, C5 |
| 1 | 1000uF / 100V | CP_Radial_D18.0mm_P7.50mm | C7 |
| 1 | 1000uF 100V | CP_Radial_D18.0mm_P7.50mm | C8 |
| 3 | 4.7uF | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C9, C10, C24 |
| 12 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C16, C17, C18, C25, C26, C27, C28 +4 |
| 2 | 22pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C19, C20 |
| 3 | 10nF | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C21, C22, C23 |
| 2 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C31, C34 |
| 1 | 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C32 |
| 7 | 10uF | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C38, C39, C40, C41, C48, C49, C50 |
| 1 | 1nF | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C42 |
| 11 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R11, R12, R13, R14 +3 |
| 3 | 2.2K | R_1210_3225Metric | R5, R6, R7 |
| 3 | 4.7K | R_1210_3225Metric | R8, R9, R10 |
| 1 | 22K | R_1210_3225Metric | R16 |
| 1 | 1K | R_1210_3225Metric | R17 |
| 1 | 10K | R_1210_3225Metric | R18 |
| 1 | 10mR | R_Shunt_Vishay_WSR2_WSR3_KelvinConnection | R19 |
| 1 | 2K | R_1210_3225Metric | R20 |
| 1 | 10R | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R21 |
| 5 | 10R | R_1210_3225Metric | R22, R23, R24, R25, R26 |
Motor-Driver-V2 design files
The KiCad project lives in the anshinx/Motor-Driver-V2 repository on GitHub; these links point at the commit this page was built from.
- Layoutmotordriverv2.kicad_pcb
- Schematicmotordriverv2.kicad_sch
Motor-Driver-V2: common questions
What microcontroller does the Motor-Driver-V2 use?
The Motor-Driver-V2 is built around the STM32G474VETx, from the STM32 family.
How big is the Motor-Driver-V2 PCB?
The Motor-Driver-V2 measures 132.5 × 118.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Motor-Driver-V2?
117 components, from 42 distinct parts. The full bill of materials is listed on this page.
Where can I download the Motor-Driver-V2 design files?
From the anshinx/Motor-Driver-V2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Motor-Driver-V2 design in my own project?
The repository has no license, so all rights stay with anshinx. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Motor-Driver-V2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k