8 open source boards using the STM32G474VETX
Real designs built with the STM32G474VETX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Td deflect
tdaede
174 × 104 mm165 parts4LNo license370STM32
RT-STACK
fupsrl
150 × 150 mm472 parts6LCC-BY-NC-4.015STM32
Spartacus PCB REV1
vpcsln
100 × 175 mm436 parts6LNo license1STM32
Spartacus PCB REV1
spartacus-hf
100 × 175 mm436 parts6LCERN-OHL-S-2.01STM32
Chireix
vpcsln
100 × 175 mm435 parts6LNo license1STM32
Motor-Driver-V2
anshinx
132.5 × 118.2 mm117 parts4LNo license0STM32
Digital System Dev
skylar-slideshows
108 × 76.8 mm74 parts6LNo license3STM32
INV Boost Controller
NTURacingTeam
100 × 100 mm256 parts4LNo license0
How designs wire the STM32G474VETX
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the STM32G474VETX connects to, and the resistors, capacitors and other passives placed on it.
- The VREF+_36 pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 1 µF).
- The VDDA_37 pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 1 µF).
- The VDD_49 pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 1 µF).
- The VDD_75 pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBAT_6pin 6 | Connected to: 3.3V 88% |
|
| PF0_12pin 12 | Connected to: Signal 100% |
|
| PG10_14pin 14 | Connected to: A connector 63% |
|
| PC0_15pin 15 | Connected to: Signal 88% |
|
| PC1_16pin 16 | Connected to: Signal 88% |
|
| PC2_17pin 17 | Connected to: Signal 88% |
|
| PC3_18pin 18 | Connected to: Signal 63% · not connected 25% |
|
| PA0_20pin 20 | Connected to: Signal 88% |
|
| PA1_21pin 21 | Connected to: Signal 88% |
|
| PA2_22pin 22 | Connected to: Signal 88% |
|
| VSS_23pin 23 | Connected to: GND 100% | — |
| VDD_24pin 24 | Connected to: 3.3V 100% |
|
| PA3_25pin 25 | Connected to: A connector 25% |
|
| PC4_30pin 30 | Connected to: A connector 25% |
|
| PC5_31pin 31 | Connected to: A connector 25% · not connected 25% |
|
| PB1_33pin 33 | Connected to: A connector 25% |
|
| PB2_34pin 34 | Connected to: Signal 75% |
|
| VSSA_35pin 35 | Connected to: GND 100% | — |
| VREF+_36pin 36 | Connected to: 3.3V 63% · a signal 38% |
|
| VDDA_37pin 37 | Connected to: 3.3V 63% · a signal 38% |
|
| PE9_40pin 40 | Connected to: A connector 38% |
|
| PB10_47pin 47 | Connected to: A connector 25% · not connected 25% |
|
| VSS_48pin 48 | Connected to: GND 100% | — |
| VDD_49pin 49 | Connected to: 3.3V 100% |
|
| PB11_50pin 50 | Connected to: Signal 75% · not connected 25% |
|
| PB14_53pin 53 | Connected to: A connector 38% |
|
| PD8_55pin 55 | Connected to: A connector 25% |
|
| PD9_56pin 56 | Connected to: A connector 25% |
|
| PD10_57pin 57 | Connected to: A connector 25% |
|
| PD12_59pin 59 | Connected to: A connector 25% · not connected 25% |
|
| PD13_60pin 60 | Connected to: Not connected 63% · a signal 38% | — |
| PD14_61pin 61 | Connected to: A connector 25% · not connected 25% |
|
| PD15_62pin 62 | Connected to: A connector 25% · not connected 25% |
|
| VSS_63pin 63 | Connected to: GND 100% | — |
| VDD_64pin 64 | Connected to: 3.3V 100% |
|
| PC6_65pin 65 | Connected to: A connector 38% |
|
| PC7_66pin 66 | Connected to: A connector 38% |
|
| VSS_74pin 74 | Connected to: GND 100% | — |
| VDD_75pin 75 | Connected to: 3.3V 100% |
|
| PC10_79pin 79 | Connected to: A connector 50% |
|
60 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Td deflect by tdaede, RT-STACK by fupsrl, Digital System Dev by skylar-slideshows and Spartacus PCB REV1 by spartacus-hf.
The STM32G474VETX in open source designs
The gallery holds 8 open source boards using the STM32G474VETX from 8 GitHub repositories; a typical one measures about 104 × 134.1 mm and carries around 346 components.
100% use four copper layers or more, and 13% carry an open source license.
The most starred is Td deflect by tdaede.
Parts used alongside the STM32G474VETX
Microcontrollers on boards using the STM32G474VETX
What boards using the STM32G474VETX are built for
STM32G474VETX: common questions
Where can I find a STM32G474VETX reference design?
Each of the 8 boards on this page is a real design using the STM32G474VETX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32G474VETX VREF+_36 pin?
The VREF+_36 pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the STM32G474VETX.
What decoupling capacitors do designs use on the STM32G474VETX VDDA_37 pin?
The VDDA_37 pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the STM32G474VETX.
What decoupling capacitors do designs use on the STM32G474VETX VDD_49 pin?
The VDD_49 pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the STM32G474VETX.
What parts are used alongside the STM32G474VETX?
The 161N-4BVS11, DSC1003DL2-008.0000T, LM1084IT-5.0G, MC74ACT541DTR2G and NE5532 appear in the most repositories here.
Which microcontrollers do boards using the STM32G474VETX use?
Most are built on STM32 (8).
How big is a typical board using the STM32G474VETX?
The median is 104 × 134.1 mm, and 0% are two-layer designs.
What is the most popular open source board using the STM32G474VETX?
By GitHub stars, Td deflect by tdaede, with 370 stars.
Can I simulate one of these boards using the STM32G474VETX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.