5 open source boards using the TC4422

Real designs built with the TC4422, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the TC4422

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TC4422 connects to, and the resistors, capacitors and other passives placed on it.

  • The OUTPUT pins have a series resistor on 3 of 5 designs, most often 10 Ω.
  • The VDD pins have a inductor on 2 of 5 designs, most often 300 µH.
VDDpin 1, 8Connected to: A connector 20%, TC4422 20%, TLV1117-33CDCYRG3 20% · 12V 40%
  • Inductor on 40% · 300 µH (2)
NCpin 3Connected to: Not connected 100%
GNDpin 4, 5Connected to: GND 60% · a signal 40%
OUTPUTpin 6, 7Connected to: Signal 100%
  • Series resistor on 60% · 10 Ω (6)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EV-Controller by D3stan, Model-Predictive-Control-Strategies for-Fourth-Order-Power-Converters by aguscsc, MPPT-Controller by akbar-q and Motor-Driver-V2 by anshinx.

The TC4422 in open source designs

The gallery holds 5 open source boards using the TC4422 from 5 GitHub repositories; a typical one measures about 76 × 81.8 mm and carries around 23 components.

60% use four copper layers or more, and 20% carry an open source license.

The most starred is EV-Controller by D3stan.

Microcontrollers on boards using the TC4422

What boards using the TC4422 are built for

TC4422: common questions

Where can I find a TC4422 reference design?

Each of the 5 boards on this page is a real design using the TC4422. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TC4422 OUTPUT pin?

The OUTPUT pins have a series resistor on 3 of 5 designs, most often 10 Ω. Counted from the KiCad layouts of 5 open source designs using the TC4422.

How is the TC4422 VDD pin connected?

The VDD pins have a inductor on 2 of 5 designs, most often 300 µH. Counted from the KiCad layouts of 5 open source designs using the TC4422.

Which microcontrollers do boards using the TC4422 use?

Most are built on ESP32 (1) and STM32 (1).

How big is a typical board using the TC4422?

The median is 76 × 81.8 mm, and 40% are two-layer designs.

What is the most popular open source board using the TC4422?

By GitHub stars, EV-Controller by D3stan, with 1 stars.

Can I simulate one of these boards using the TC4422 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part