HardLabs

BoohRP2040

anshulsamudayanan·BoohRP2040·PCB Files/Booh_RP2040.kicad_pcb

BoohRP2040 PCB layout, top view — open source RP2040/RP2350 board by anshulsamudayanan

About the BoohRP2040 PCB

BoohRP2040 is an open source RP2040/RP2350 PCB design by anshulsamudayanan, published on GitHub. It is a 2-layer board measuring 21 × 51.1 mm, with 33 components from 16 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS and MCP1700x-330xxTT. By type, the board carries 17 capacitors, 7 resistors, 4 connectors, 3 ICs, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

A RP2040 based devboard

A minimal, RP2040-based Pi Pico clone, designed and built from scratch in KiCad.

Booh RP2040 is a custom development board built around the Raspberry Pi RP2040 microcontroller.This repo covers schematic capture, PCB layout, and assembly for a minimal Pico-style board.

- MCU: Raspberry Pi RP204 - Flash: W25Q16JV, 2MB QSPI flash - Power: USB-C input, regulated to 3.3V via onboard LDO - I/O: through-hole pin headers along both edges - Layout: 2-layer PCB with groud layer - Form factor: Pi Pico-sized footprint

BoohRP2040, from the project README
From the project README

Main components on the BoohRP2040

RP2040W25Q128JVSMCP1700x-330xxTT

BoohRP2040 bill of materials (BOM)

33 components, 16 distinct parts.

QtyPartRefs
1
RP2040
U1
1
W25Q128JVS
U3
1
MCP1700x-330xxTT
U4
1
12 MHz
Y1
1
USB_C_Receptacle_USB2.0_14P
J1
2
Conn_01x20
J2, J3
1
Conn_01x03
J4
1
SW_Push
SW1
11
0.1uF
C1, C2, C3, C4, C5, C6, C7, C8 +3
2
1uF
C9, C12
2
10uF
C13, C14
2
15pF
C15, C16
2
5.1K
R1, R2
2
27
R3, R4
2
1K
R5, R6
1
10K
R7

BoohRP2040 design files

The KiCad project lives in the anshulsamudayanan/BoohRP2040 repository on GitHub; these links point at the commit this page was built from.

BoohRP2040: common questions

What microcontroller does the BoohRP2040 use?

The BoohRP2040 is built around the RP2040, from the RP2040/RP2350 family.

How big is the BoohRP2040 PCB?

The BoohRP2040 measures 21 × 51.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the BoohRP2040?

33 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the BoohRP2040 design files?

From the anshulsamudayanan/BoohRP2040 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the BoohRP2040 design in my own project?

The repository has no license, so all rights stay with anshulsamudayanan. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the BoohRP2040 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards