PcbMidi

antelliJ·pcbMidi·PCB/MusicDevice.kicad_pcb

PcbMidi PCB layout, top view — open source ESP32 board by antelliJ

About the PcbMidi PCB

PcbMidi is an open source ESP32 PCB design by antelliJ, published on GitHub under the MIT license. It is a 2-layer board measuring 90.8 × 63.5 mm, with 11 components from 6 distinct parts.

Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 4 switches, 3 diodes, 1 IC and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

A pocket sampler that records to an SD card

Components - EC11 Rotary encoder - SK6812 MINI-E neopixels - Bourns Slide Potentiometers - Kailh Choc Low-Profile Switches

The midi keys are built to be activated by capacitive touch based on the exposed copper on the PCB

I built this since I don't have a lot of space for an entire keyboard, so something simple can hopefully allow me to get something ready quickly if necessary The lights on the back should also add a nice touch and some element of customizability

PcbMidi, from the project README
From the project README

Main components on the PcbMidi

PcbMidi bill of materials (BOM)

11 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Waveshare ESP32-S3-ZERO
U1
1
Capacitive Touch Buttons
J1
2
R_Potentiometer
RV1, RV2
3
SW_Push
SW1, SW2, SW3
1
RotaryEncoder_Switch_MP
SW4
3
SK6812MINI-E
D1, D2, D3

PcbMidi design files

The KiCad project lives in the antelliJ/pcbMidi repository on GitHub; these links point at the commit this page was built from.

PcbMidi: common questions

What microcontroller does the PcbMidi use?

The PcbMidi is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.

How big is the PcbMidi PCB?

The PcbMidi measures 90.8 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PcbMidi?

11 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PcbMidi design files?

From the antelliJ/pcbMidi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PcbMidi design in my own project?

Yes, under the terms of its MIT license, which antelliJ chose for the repository.

Can I test firmware for the PcbMidi without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards