Audio
anton-vinogradov·esp32-leshy2·drafts/legacy-2026-08-22/tscircuit-pre-g2f3i/audio.kicad_pcb
About the Audio PCB
Audio is an open source PCB design by anton-vinogradov, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 60 mm, with 19 components from 12 distinct parts.
By type, the board carries 10 capacitors, 4 ICs, 1 crystal, 1 connector, 1 speaker and 1 microphone.
It belongs with the audio and rf & radio designs in this gallery.
From the project
Open multiband RF handheld on ESP32-S3 + ESP32-C5 — successor to esp32-leshy / ESP32-DIV
2.4/5-GHz Wi‑Fi · BLE · 802.15.4 · 3× nRF24 · Sub‑GHz · VHF/UHF · FM/AM/SW/LW/Airband · IR · LoRa/CC1101+NFC Cap
Capabilities · Roadmap · Stage reports · Schematics · Firmware · Русский
Leshy2 is intended to be a hobby device combining spectrum observation, communication, diagnostics and safe experimentation without a mandatory laptop. The first order targets one genuinely working prototype: the factory supplies two populated PCBAs and the owner completes a simple, solder-free final assembly.
Audio bill of materials (BOM)
19 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | — | chip | U30, U31, U32, U33 |
| 1 | — | chip | Y1 |
| 1 | — | chip_pinrow4 | J30 |
| 1 | 4Ω | resistor_res1210 | LS1 |
| 1 | 2.2kΩ | resistor_res0603 | MK1 |
| 2 | 12pF | capacitor_cap0402 | CL1, CL2 |
| 1 | 330uF | capacitor_cap1210 | Cbulk31 |
| 3 | 100nF | capacitor_cap0402 | Cbyp31, Cd33, Cvdd30b |
| 2 | 220uF | capacitor_cap1210 | Cjk1, Cjk2 |
| 1 | 10uF | capacitor_cap0805 | Cvcc32 |
| 1 | 1uF | capacitor_cap0402 | Cvdd30 |
| 1 | 10kΩ | resistor_res0402 | Rin32 |
Audio design files
The KiCad project lives in the anton-vinogradov/esp32-leshy2 repository on GitHub; these links point at the commit this page was built from.
Audio: common questions
How big is the Audio PCB?
The Audio measures 80 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Audio?
19 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Audio design files?
From the anton-vinogradov/esp32-leshy2 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Audio design in my own project?
Yes, under the terms of its MIT license, which anton-vinogradov chose for the repository.
More boards in esp32-leshy2
Leshy2 LESHY2-RF-R2 R2 exact placement
anton-vinogradov
80 × 150 mm778 parts6LMIT6ESP32
Leshy2 LESHY2-UI-R2 R2 exact placement
anton-vinogradov
80 × 150 mm430 parts6LMIT6Power
anton-vinogradov
90 × 70 mm42 parts2LMIT6Indicators
anton-vinogradov
90 × 70 mm37 parts2LMIT6Expansion
anton-vinogradov
80 × 60 mm13 parts2LMIT6
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687