Anton s-ESP32-drone
anton2785-bit·Anton-s-ESP32-drone·PCB/ESP 32 drone.kicad_pcb
About the Anton s-ESP32-drone PCB
Anton s-ESP32-drone is an open source ESP32 PCB design by anton2785-bit, published on GitHub. It is a 4-layer board measuring 19.5 × 21.8 mm, with 36 components from 11 distinct parts.
Its main chip is the XIAO-ESP32-S3-DIP, from the ESP32 family. Other key parts include the MPU-6050. By type, the board carries 10 resistors, 9 capacitors, 6 diodes, 5 connectors, 4 modules and 2 ICs.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
A drone using the ESP 32 for a FC
* This is an image of the Frame with the XIAO in it:
Designed and built by (Anton/ Anton-2785-bit) * Inspired by open‑source mechanical keyboard and hackpad communities (https://macondo.hackclub.com/).
Main components on the Anton s-ESP32-drone
Anton s-ESP32-drone bill of materials (BOM)
36 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-S3-DIP | XIAO-ESP32-S3-DIP | U1 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 4 | SI2300 | SOT23_1_ | M1, M2, M3, M4 |
| 1 | Batterry | TestPoint_THTPad_D1.5mm_Drill0.7mm | J1 |
| 4 | motor | PinHeader_1x02_P1.00mm_Vertical | J2, J3, J4, J5 |
| 2 | LED | PinHeader_1x02_P1.00mm_Vertical | D1, D2 |
| 4 | 1N4148W | D_SOD-123 | D3, D4, D5, D6 |
| 6 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C7, C9 |
| 3 | 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C8 |
| 2 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 8 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R7, R8, R9, R10 |
Anton s-ESP32-drone design files
The KiCad project lives in the anton2785-bit/Anton-s-ESP32-drone repository on GitHub; these links point at the commit this page was built from.
Anton s-ESP32-drone: common questions
What microcontroller does the Anton s-ESP32-drone use?
The Anton s-ESP32-drone is built around the XIAO-ESP32-S3-DIP, from the ESP32 family.
How big is the Anton s-ESP32-drone PCB?
The Anton s-ESP32-drone measures 19.5 × 21.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Anton s-ESP32-drone?
36 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Anton s-ESP32-drone design files?
From the anton2785-bit/Anton-s-ESP32-drone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Anton s-ESP32-drone design in my own project?
The repository has no license, so all rights stay with anton2785-bit. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Anton s-ESP32-drone without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k