MIDI-Keypad

anvaymathur·MIDI-Keypad·KiCad/MIDIKeyboardProject.kicad_pcb

MIDI-Keypad PCB layout, top view — open source ESP32 board by anvaymathur

About the MIDI-Keypad PCB

MIDI-Keypad is an open source ESP32 PCB design by anvaymathur, published on GitHub. It is a 2-layer board measuring 98 × 76 mm, with 7 components from 5 distinct parts.

Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 3 diodes, 2 connectors, 1 IC and 1 switch.

It belongs with the audio and displays & leds designs in this gallery.

From the project

MIDI Keypad built for Half Life from HackClub

MIDI Keypad built for Half Life from HackClub. It is hackpad that uses copper touch pads that act as buttons for playing notes. A rotary encoder is used to control the octave of the notes. It can also act like a normal macropad if you chose to, just push down the encoder to switch modes. The encoder will then act as volume control and the copper touch pads will act like your macro keys.

MIDI-Keypad, from the project README
From the project README

Main components on the MIDI-Keypad

MIDI-Keypad bill of materials (BOM)

7 components, 5 distinct parts.

QtyPartRefs
1
Waveshare ESP32-S3-ZERO
U1
1
Conn_01x07
J1
1
Conn_01x04_Socket
J2
1
RotaryEncoder_Switch
SW1
3
SK6812MINI-E
D1, D2, D3

MIDI-Keypad design files

The KiCad project lives in the anvaymathur/MIDI-Keypad repository on GitHub; these links point at the commit this page was built from.

MIDI-Keypad: common questions

What microcontroller does the MIDI-Keypad use?

The MIDI-Keypad is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.

How big is the MIDI-Keypad PCB?

The MIDI-Keypad measures 98 × 76 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MIDI-Keypad?

7 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the MIDI-Keypad design files?

From the anvaymathur/MIDI-Keypad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MIDI-Keypad design in my own project?

The repository has no license, so all rights stay with anvaymathur. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MIDI-Keypad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards