MusicDisplay
anvaymathur·MusicDisplay·KiCad/MusicDisplayWeek.kicad_pcb
About the MusicDisplay PCB
MusicDisplay is an open source ESP32 PCB design by anvaymathur, published on GitHub. It is a 2-layer board measuring 95 × 62 mm, with 5 components from 4 distinct parts.
Its main chip is the ESP32-S3_SuperMini, from the ESP32 family. By type, the board carries 2 resistors, 1 IC, 1 connector and 1 switch.
It belongs with the displays & leds and iot & wireless designs in this gallery.
From the project
An e-paper music display that changes over Bluetooth. Displays your current music playing and time
The reason I wanted to build this is because, often when I listen to music while studying. If i ever want to change the music or adjust the volume, I get distracted looking at my phone. I also don't have headphones which can switch the music from itself. So I wanted something where I can control the music and look at time and only important stuff, but I can't get distracted from something else.

Main components on the MusicDisplay
MusicDisplay bill of materials (BOM)
5 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3_SuperMini | ESP32-S3_SuperMini_2x9_Header | U1 |
| 1 | Conn_01x14 | PinHeader_1x14_P2.54mm_Vertical | J1 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 2 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
MusicDisplay design files
The KiCad project lives in the anvaymathur/MusicDisplay repository on GitHub; these links point at the commit this page was built from.
MusicDisplay: common questions
What microcontroller does the MusicDisplay use?
The MusicDisplay is built around the ESP32-S3_SuperMini, from the ESP32 family.
How big is the MusicDisplay PCB?
The MusicDisplay measures 95 × 62 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MusicDisplay?
5 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the MusicDisplay design files?
From the anvaymathur/MusicDisplay repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MusicDisplay design in my own project?
The repository has no license, so all rights stay with anvaymathur. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MusicDisplay without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k