HalfLifeWeek3-Music

AnvithPothula·HalfLifeWeek3-Music·midi-keypad/midi-keypad.kicad_pcb

HalfLifeWeek3-Music PCB layout, top view — open source ESP32 board by AnvithPothula

About the HalfLifeWeek3-Music PCB

HalfLifeWeek3-Music is an open source ESP32 PCB design by AnvithPothula, published on GitHub. It is a 2-layer board measuring 89.5 × 87.5 mm, with 8 components from 5 distinct parts.

Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 3 diodes, 2 switches, 1 IC and 1 connector.

It belongs with the audio and displays & leds designs in this gallery.

From the project

I followed the guide to create the MIDI keypad. However, I made some changes. I added a second encoder, and since I decided to use both encoders clicking functionalities, I had to remove the low-profile switches and a slider to make room on the ESP32. The remaining slider is used

I followed the guide to create the MIDI keypad. However, I made some changes. I added a second encoder, and since I decided to use both encoders clicking functionalities, I had to remove the low-profile switches and a slider to make room on the ESP32. The remaining slider is used for volume, the first encoder for changing octaves, and the second encoder for adding a modulation effect. This is the final result of how the PCB looks like:

HalfLifeWeek3-Music, from the project README
From the project README

Main components on the HalfLifeWeek3-Music

HalfLifeWeek3-Music bill of materials (BOM)

8 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Waveshare ESP32-S3-ZERO
U1
1
CONN_01X07
Conn_01x07
J1
1
R_Potentiometer_MountingPin
RV1
2
RotaryEncoder_Switch_MP
SW4, SW5
3
SK6812MINI-E
D1, D2, D3

HalfLifeWeek3-Music design files

The KiCad project lives in the AnvithPothula/HalfLifeWeek3-Music repository on GitHub; these links point at the commit this page was built from.

HalfLifeWeek3-Music: common questions

What microcontroller does the HalfLifeWeek3-Music use?

The HalfLifeWeek3-Music is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.

How big is the HalfLifeWeek3-Music PCB?

The HalfLifeWeek3-Music measures 89.5 × 87.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HalfLifeWeek3-Music?

8 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HalfLifeWeek3-Music design files?

From the AnvithPothula/HalfLifeWeek3-Music repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HalfLifeWeek3-Music design in my own project?

The repository has no license, so all rights stay with AnvithPothula. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HalfLifeWeek3-Music without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards