HalfLifeWeek4-Displays

AnvithPothula·HalfLifeWeek4-Displays·DeskDashboard/DeskDashboard.kicad_pcb

HalfLifeWeek4-Displays PCB layout, top view — open source ESP32 board by AnvithPothula

About the HalfLifeWeek4-Displays PCB

HalfLifeWeek4-Displays is an open source ESP32 PCB design by AnvithPothula, published on GitHub. It is a 2-layer board measuring 95 × 70 mm, with 6 components from 6 distinct parts.

Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 1 IC, 1 transistor, 1 connector, 1 switch, 1 capacitor and 1 resistor.

It belongs with the displays & leds and iot & wireless designs in this gallery.

From the project

For Week 4 I designed my own project from scratch: a Wi-Fi desk dashboard. It's a small PCB with an ESP32-S3-Zero, a 2.0" color screen, and one rotary encoder. It sits on my desk and shows the things I check every day, so I don't have to pick up my phone for them. Turning the kno

For Week 4 I designed my own project from scratch: a Wi-Fi desk dashboard. It's a small PCB with an ESP32-S3-Zero, a 2.0" color screen, and one rotary encoder. It sits on my desk and shows the things I check every day, so I don't have to pick up my phone for them. Turning the knob switches between 9 pages, and pressing it does something different on each page.

Main components on the HalfLifeWeek4-Displays

HalfLifeWeek4-Displays bill of materials (BOM)

6 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Waveshare ESP32-S3-ZERO
U1
1
AO3401A
Q1
1
CONN_01X08
Conn_01x08
J1
1
RotaryEncoder_Switch
SW1
1
10U
10u
C1
1
10K
10k
R1

HalfLifeWeek4-Displays design files

The KiCad project lives in the AnvithPothula/HalfLifeWeek4-Displays repository on GitHub; these links point at the commit this page was built from.

HalfLifeWeek4-Displays: common questions

What microcontroller does the HalfLifeWeek4-Displays use?

The HalfLifeWeek4-Displays is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.

How big is the HalfLifeWeek4-Displays PCB?

The HalfLifeWeek4-Displays measures 95 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HalfLifeWeek4-Displays?

6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HalfLifeWeek4-Displays design files?

From the AnvithPothula/HalfLifeWeek4-Displays repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the HalfLifeWeek4-Displays design in my own project?

The repository has no license, so all rights stay with AnvithPothula. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HalfLifeWeek4-Displays without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards