RC Charger
aokblast·ThunderChargeXPro·RC_Charger/RC_Charger.kicad_pcb
About the RC Charger PCB
RC Charger is an open source STM32 PCB design by aokblast, published on GitHub. It is a 4-layer board measuring 200 × 100 mm, with 296 components from 55 distinct parts.
Its main chip is the STM32F103C8TX, from the STM32 family. Other key parts include the LTV-817S, LM2904, MP2984, INA180A1 and L7805. By type, the board carries 132 resistors, 88 capacitors, 27 ICs, 22 transistors, 9 connectors and 6 diodes.
It belongs with the power & battery designs in this gallery.
Main components on the RC Charger
RC Charger bill of materials (BOM)
296 components, 55 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 12 | LTV-817S | SMDIP-4_W9.53mm | U1, U2, U3, U4, U5, U6, U18, U19 +4 |
| 6 | LM2904 | SOIC-8_3.9x4.9mm_P1.27mm | U7, U8, U9, U24, U25, U26 |
| 2 | MP2984 | QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm | U10, U16 |
| 2 | INA180A1 | SOT-23-5 | U11, U17 |
| 1 | L7805 | TO-252-2 | U12 |
| 2 | STM32F103C8TX STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U15, U28 |
| 2 | INA240A1D | SOIC-8_3.9x4.9mm_P1.27mm | U59, U62 |
| 12 | DMG2301L | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q15, Q16 +4 |
| 8 | IRFH5210 | PQFN-8-EP_6x5mm_P1.27mm_Generic | Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14 |
| 2 | AO3400A | SOT-23 | Q21, Q22 |
| 2 | 8M | Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm | Y1, Y2 |
| 2 | CONN_01X07 Conn_01x07 | JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical | J1, J6 |
| 2 | SWD | PinHeader_1x04_P2.54mm_Vertical | J2, J7 |
| 1 | CONN_02X03_ODD_EVEN Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 2 | PWR1_DBG | PinHeader_1x03_P2.54mm_Vertical | J5, J11 |
| 2 | BAT | TerminalBlock_Dinkle_DT-55-B01X-02_P10.00mm | J16, J19 |
| 2 | RST | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP3 |
| 2 | BOOT0 | SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm | JP2, JP4 |
| 2 | G2RL-1A-E | Relay_SPST_Omron_G2RL-1A-E | K1, K2 |
| 2 | SW_DIP_X03 SW_DIP_x03 | SW_DIP_SPSTx03_Slide_9.78x9.8mm_W8.61mm_P2.54mm | SW1, SW2 |
Show 35 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | LED | LED_0603_1608Metric | D1, D2, D3, D4 |
| 2 | SM4001 | D_MELF | D5, D6 |
| 2 | 4.7U 4.7u | L_Bourns_SRP1770TA_16.9x16.9mm | L1, L6 |
| 28 | 100N 100n | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +20 |
| 4 | 100U 100u | CP_Elec_6.3x7.7 | C10, C33, C42, C55 |
| 14 | 10U 10u | C_1206_3216Metric | C11, C12, C13, C14, C30, C31, C32, C56 +6 |
| 4 | 2.2U 2.2u | C_0805_2012Metric | C15, C16, C60, C61 |
| 12 | 0.1U 0.1u | C_0603_1608Metric | C17, C21, C23, C25, C27, C28, C62, C66 +4 |
| 2 | 100P 100p | C_0603_1608Metric | C18, C63 |
| 2 | 560P 560p | C_0603_1608Metric | C19, C64 |
| 2 | 47N 47n | C_0603_1608Metric | C20, C65 |
| 2 | 68N 68n | C_0603_1608Metric | C22, C67 |
| 2 | 47P 47p | C_0603_1608Metric | C24, C69 |
| 6 | 0.22U 0.22u | C_0603_1608Metric | C26, C29, C34, C71, C74, C79 |
| 2 | 22U 22u | CP_Elec_6.3x5.4 | C35, C36 |
| 4 | 26p 16V | C_0603_1608Metric | C38, C40, C92, C94 |
| 2 | 10U 10u | CP_EIA-3528-21_Kemet-B | C39, C41 |
| 2 | 22u | CP_Elec_6.3x5.4 | C43, C44 |
| 12 | 50 | R_2512_6332Metric | R1, R2, R3, R4, R5, R6, R77, R78 +4 |
| 24 | 1k | R_0603_1608Metric | R7, R8, R9, R10, R11, R12, R13, R14 +16 |
| 34 | 10K 10k | R_0603_1608Metric | R19, R20, R21, R22, R23, R24, R25, R26 +26 |
| 24 | 7.87K 7.87k | R_0603_1608Metric | R31, R32, R33, R34, R35, R36, R37, R38 +16 |
| 4 | 2.2K 2.2k | R_0603_1608Metric | R43, R45, R62, R64 |
| 4 | 100K 100k | R_0603_1608Metric | R44, R49, R63, R68 |
| 2 | 42.2K 42.2k | R_0603_1608Metric | R47, R66 |
| 2 | 3.3K 3.3k | R_0603_1608Metric | R48, R67 |
| 2 | 2.61K 2.61k | R_0603_1608Metric | R50, R69 |
| 8 | 100 | R_0603_1608Metric | R51, R52, R54, R56, R70, R71, R73, R75 |
| 2 | 3m | R_Shunt_1575 | R53, R72 |
| 2 | 3m | R_Shunt_Vishay_WSK2512_6332Metric_T2.21mm | R55, R74 |
| 2 | 4m | R_Shunt_Vishay_WSK2512_6332Metric_T2.21mm | R57, R76 |
| 4 | 100 | R_0603_1608Metric | R58, R59, R119, R120 |
| 2 | 68K 68k | R_0603_1608Metric | R60, R121 |
| 2 | 1.5M | R_0603_1608Metric | R245, R246 |
| 2 | 9.53K 9.53k | R_0603_1608Metric | R249, R252 |
RC Charger design files
The KiCad project lives in the aokblast/ThunderChargeXPro repository on GitHub; these links point at the commit this page was built from.
RC Charger: common questions
What microcontroller does the RC Charger use?
The RC Charger is built around the STM32F103C8TX, from the STM32 family.
How big is the RC Charger PCB?
The RC Charger measures 200 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the RC Charger?
296 components, from 55 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RC Charger design files?
From the aokblast/ThunderChargeXPro repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RC Charger design in my own project?
The repository has no license, so all rights stay with aokblast. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RC Charger without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in ThunderChargeXPro
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k