Mini-Music-Studio
AP-123456789·Mini-Music-Studio·Hardware/Mini_Music_Studio.kicad_pcb
About the Mini-Music-Studio PCB
Mini-Music-Studio is an open source ESP32 PCB design by AP-123456789, published on GitHub. It is a 2-layer board measuring 140 × 154 mm, with 45 components from 7 distinct parts.
Its main chip is the Waveshare ESP32-S3-ZERO, from the ESP32 family. By type, the board carries 24 diodes, 14 switches, 4 connectors and 1 IC.
It belongs with the keyboards, audio and displays & leds designs in this gallery.
From the project
A compact, custom-designed USB MIDI controller built completely from scratch around the Waveshare ESP32-S3-Zero microcontroller. Designed as an intensive beginner learning project in KiCad 10.0 and PlatformIO, this project documents a 35-hour journey of trial, error, troubleshoot
A compact, custom-designed USB MIDI controller built completely from scratch around the Waveshare ESP32-S3-Zero microcontroller. Designed as an intensive beginner learning project in KiCad 10.0 and PlatformIO, this project documents a 35-hour journey of trial, error, troubleshooting, and iteration in custom PCB design, schematic capture, dual-layer trace routing, and embedded C++ firmware development.

Main components on the Mini-Music-Studio
Mini-Music-Studio bill of materials (BOM)
45 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Waveshare ESP32-S3-ZERO | Waveshare ESP32-S3-Zero | U1 |
| 4 | CONN_01X01 Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | J1, J2, J3, J4 |
| 2 | R_Potentiometer_MountingPin | Potentiometer_Bourns_PTA1543_Single_Slide | RV1, RV2 |
| 12 | SW_Push | Kailh Choc Low-Profile Switches | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +4 |
| 2 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW13, SW14 |
| 12 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1, D2, D3, D4, D5, D6, D7, D8 +4 |
| 12 | D_Small | D_DO-35_SOD27_P7.62mm_Horizontal | D13, D14, D15, D16, D17, D18, D19, D20 +4 |
Mini-Music-Studio design files
The KiCad project lives in the AP-123456789/Mini-Music-Studio repository on GitHub; these links point at the commit this page was built from.
Mini-Music-Studio: common questions
What microcontroller does the Mini-Music-Studio use?
The Mini-Music-Studio is built around the Waveshare ESP32-S3-ZERO, from the ESP32 family.
How big is the Mini-Music-Studio PCB?
The Mini-Music-Studio measures 140 × 154 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mini-Music-Studio?
45 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Mini-Music-Studio design files?
From the AP-123456789/Mini-Music-Studio repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Mini-Music-Studio design in my own project?
The repository has no license, so all rights stay with AP-123456789. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Mini-Music-Studio without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k