Avi hw mesh node
Apoll011·avi-hw-mesh-node·Hardware/ORBIT.kicad_pcb
About the Avi hw mesh node PCB
Avi hw mesh node is an open source ESP32 PCB design by Apoll011, published on GitHub under the MIT license. It is a 2-layer board measuring 32 × 30 mm, with 27 components from 21 distinct parts.
Its main chip is the ESP32-C6-MINI-1/U, from the ESP32 family. Other key parts include the MCP73031 and TPS63802DLAR. By type, the board carries 10 resistors, 5 capacitors, 3 ICs, 3 connectors, 3 diodes and 1 module.
It belongs with the usb & debug tools designs in this gallery.
From the project
Reference hardware design for an AVI mesh node based on ESP32-S3. Includes KiCad schematics and PCB layout for a device capable of joining the AVI peer-to-peer mesh network and participating in distributed voice and control workflows.
Project Documentation: https://embeddedprojects101.com/design-a-battery-powered-stm32-board-with-usb/

Main components on the Avi hw mesh node
Avi hw mesh node bill of materials (BOM)
27 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73031 | SOT-23-5 | U1 |
| 1 | ESP32-C6-MINI-1/U | ESP32-C6-MINI-1U | U2 |
| 1 | TPS63802DLAR | TPS63802DLAR | U15 |
| 1 | ~ | INMP441 | M1 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | Main Button | Molex_SPOX_5267-03A_1x03_P2.50mm_Vertical | J2 |
| 1 | Plugin | Wuerth_WR-WTB_64800411622_1x04_P1.50mm_Vertical | J3 |
| 1 | Battery Connector | SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | BAT1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 2 | ESD5Zxx | D_SOD-523 | D2, D3 |
| 1 | 0.47uH | L_0603_1608Metric | L1 |
| 3 | 4u7 | C_0603_1608Metric | C2, C7, C8 |
| 1 | 22uF | C_0603_1608Metric | C13 |
| 1 | 10uF | C_0603_1608Metric | C14 |
| 1 | 1k5 | R_0603_1608Metric | R1 |
| 2 | 22k | R_0603_1608Metric | R2, R4 |
| 1 | 2k | R_0603_1608Metric | R3 |
| 2 | 5.1kΩ | R_0603_1608Metric | R5, R9 |
| 2 | 100k | R_0603_1608Metric | R6, R8 |
| 1 | 560k | R_0603_1608Metric | R7 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0k | R_0603_1608Metric | R10 |
Avi hw mesh node design files
The KiCad project lives in the Apoll011/avi-hw-mesh-node repository on GitHub; these links point at the commit this page was built from.
- LayoutHardware/ORBIT.kicad_pcb
- SchematicHardware/ORBIT.kicad_sch
Avi hw mesh node: common questions
What microcontroller does the Avi hw mesh node use?
The Avi hw mesh node is built around the ESP32-C6-MINI-1/U, from the ESP32 family.
How big is the Avi hw mesh node PCB?
The Avi hw mesh node measures 32 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Avi hw mesh node?
27 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Avi hw mesh node design files?
From the Apoll011/avi-hw-mesh-node repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Avi hw mesh node design in my own project?
Yes, under the terms of its MIT license, which Apoll011 chose for the repository.
Can I test firmware for the Avi hw mesh node without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k