SenseEle PCB Antenna rev2
About the SenseEle PCB Antenna rev2
SenseEle PCB Antenna rev2 is an open source Nordic nRF PCB design by Appiko, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 92.7 × 30 mm, with 50 components from 36 distinct parts.
Its main chip is the MDBT42Q, from the Nordic nRF family. Other key parts include the TLV8802, CC1175 and SI7201-B-00-FV. By type, the board carries 30 capacitors, 5 ICs, 4 resistors, 3 connectors, 3 inductors and 2 crystals.
It belongs with the rf & radio designs in this gallery, and the repository also holds 1 earlier revision of it.
From the project
This repository contains all the KiCad based PCB design and related documentation for all the PCBs developed at Appiko.
This repository contains all the KiCad based PCB design and related documentation for all the circuit boards developed at Appiko.
All the design files are licensed using CERN Open Hardware Licence v1.2.
Main components on the SenseEle PCB Antenna rev2
SenseEle PCB Antenna rev2 bill of materials (BOM)
50 components, 36 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLV8802 KXTJ3-1057 | LGA-12_2x2mm_P0.5mm | U1 |
| 1 | MDBT42Q MIC5504-1.8YM5 | SOT-23-5 | U2 |
| 1 | MDBT42Q | mdbt42Q | U3 |
| 1 | CC1175 | CC1120 | U4 |
| 1 | SI7201-B-00-FV | SOT-23 | U6 |
| 1 | TSM2301/IRLML6401 IRLML6401 | SOT-23 | Q1 |
| 1 | TXKTPCSANF-32 | TXKTPCSANF-32 | X1 |
| 1 | Crystal | Q13FC1350000400_SMD_Crystals | Y1 |
| 1 | AUDIO-JACK-4 Conn_01x02 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Antenna | DN024_taper | AE1 |
| 1 | MP000325 | MP000325 | BT1 |
| 1 | 15nH | C_0402_1005Metric | L10 |
| 1 | 10uH | C_0603_1608Metric | L11 |
| 1 | 10nH | C_0402_1005Metric | L13 |
| 1 | 10UF 100nF | C_0402_1005Metric | C1 |
| 1 | 6.8NF 100nF | C_0402_1005Metric | C2 |
| 2 | 10UF 1uF | C_0603_1608Metric | C3, C4 |
| 1 | 6.8NF 47nF | C_0402_1005Metric | C5 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100PF 47nF | C_0402_1005Metric | C6 |
| 1 | 1UF 220nF | C_0402_1005Metric | C7 |
| 1 | 1UF 100nF | C_0402_1005Metric | C8 |
| 1 | 100NF 22uF | C_1206_3216Metric | C9 |
| 2 | 1uF | C_0603_1608Metric | C17, C18 |
| 2 | 100nF | C_0402_1005Metric | C19, C26 |
| 2 | 8pF | C_0402_1005Metric | C20, C21 |
| 1 | 22pF | C_0402_1005Metric | C29 |
| 9 | 47nF | C_0402_1005Metric | C32, C33, C35, C36, C37, C38, C39, C40 +1 |
| 1 | 1.8nF | C_0402_1005Metric | C41 |
| 2 | 10nF | C_0402_1005Metric | C42, C43 |
| 1 | 33pF | C_0402_1005Metric | C46 |
| 1 | 100pF | C_0402_1005Metric | C47 |
| 2 | 47K 10k | C_0402_1005Metric | R1, R2 |
| 1 | 22E 56k | C_0402_1005Metric | R9 |
| 1 | 82E 10E | C_0402_1005Metric | R10 |
SenseEle PCB Antenna rev2 design files
The KiCad project lives in the Appiko/sense_snap_hw repository on GitHub; these links point at the commit this page was built from.
SenseEle PCB Antenna rev2: common questions
What microcontroller does the SenseEle PCB Antenna rev2 use?
The SenseEle PCB Antenna rev2 is built around the MDBT42Q, from the Nordic nRF family.
How big is the SenseEle PCB Antenna rev2?
The SenseEle PCB Antenna rev2 measures 92.7 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SenseEle PCB Antenna rev2?
50 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SenseEle PCB Antenna rev2 design files?
From the Appiko/sense_snap_hw repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the SenseEle PCB Antenna rev2 design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which Appiko chose for the repository.
Can I test firmware for the SenseEle PCB Antenna rev2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in sense_snap_hw
STM32SenseCam rev1
45 × 70 mm62 parts2LCERN-OHL-1.22
Nordic nRFSensePi rev5 main
56.5 × 40 mm53 parts2LCERN-OHL-1.22
Nordic nRFSenseEle SMA rev1
49 × 45 mm51 parts2LCERN-OHL-1.22
Nordic nRFSenseBe rev2
60 × 40 mm43 parts2LCERN-OHL-1.22
Nordic nRFSense rev4
68 × 52 mm41 parts2LCERN-OHL-1.22
Nordic nRFSenseCam Adapter rev1
90 × 46 mm36 parts2LCERN-OHL-1.22
Nordic nRFSenseRx rev1
96 × 69 mm36 parts2LCERN-OHL-1.22
Nordic nRFSTCS2A driver rev1
65 × 61 mm34 parts2LCERN-OHL-1.22
Nordic nRFSenseble rev1
58 × 39 mm28 parts2LCERN-OHL-1.22
Nordic nRFSenseCam STCS2A rev1
65 × 26 mm28 parts2LCERN-OHL-1.22
Earlier revisions in the repo: senseEle_PCB_Antenna_rev1
Similar boards
Nordic nRFTOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0k
Nordic nRFPixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4k
Nordic nRFBoard hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381
Nordic nRFManagement
101 × 31.5 mm50 parts2LApache-2.0381
Nordic nRFBoard
363 × 128 mm420 parts4LApache-2.0381
Nordic nRFMikoto
zhiayang
18 × 33.3 mm53 parts4LApache-2.0355