ECE477
aprasan2000·ECE477·supervisor_schematic/supervisor.kicad_pcb
About the ECE477 PCB
ECE477 is an open source ESP32 PCB design by aprasan2000, published on GitHub. It is a 2-layer board measuring 102.4 × 88.7 mm, with 45 components from 25 distinct parts.
Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the 74HC14 and RFM9-LoRa-Radio. By type, the board carries 16 resistors, 5 connectors, 5 capacitors, 4 transistors, 4 switches and 3 diodes.
It belongs with the dev boards & breakouts and rf & radio designs in this gallery.
From the project
Noggin Smart Hard Hat
Main components on the ECE477
ECE477 bill of materials (BOM)
45 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC14 | DIP-14_W7.62mm | U1 |
| 1 | RFM9-LoRa-Radio | RFM9x | U2 |
| 2 | BSS138 | SOT-23 | Q1, Q2 |
| 2 | MMBT2222 | SOT95P240X114-3N | Q3, Q4 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x07_Female | PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04_Female | PinHeader_1x04_P2.54mm_Vertical | J17 |
| 1 | ESP32-WROOM-32D | ESP32WROOM32D | ANT1 |
| 1 | 10u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | CP4 |
| 1 | 0.1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | CP5 |
| 1 | PJ-059A | PJ059A | Jack1 |
| 1 | PS1240P02BT | PS1240P02BT | LS1 |
| 4 | SW_Push | SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 1 | U1V10F5 | U1V10F5-VR | VR1 |
| 1 | Green LED | 0805_LED_Extended | D1 |
| 1 | Red LED | 0805_LED_Extended | D2 |
| 1 | LED | 0805_LED_Extended | D3 |
| 2 | 1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C4 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0.1u | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3 |
| 1 | 100n | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6 |
| 12 | 10K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R6, R10, R11, R12 +4 |
| 1 | 1K | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5 |
| 3 | 330 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7, R8, R9 |
ECE477 design files
The KiCad project lives in the aprasan2000/ECE477 repository on GitHub; these links point at the commit this page was built from.
ECE477: common questions
What microcontroller does the ECE477 use?
The ECE477 is built around the ESP32-WROOM-32D, from the ESP32 family.
How big is the ECE477 PCB?
The ECE477 measures 102.4 × 88.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ECE477?
45 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the ECE477 design files?
From the aprasan2000/ECE477 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ECE477 design in my own project?
The repository has no license, so all rights stay with aprasan2000. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ECE477 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k