Esp bluepill board
ar216-2355·esp_bluepill_board
About the Esp bluepill board
Esp bluepill board is an open source ESP32 PCB design by ar216-2355, published on GitHub. It is a 2-layer board measuring 84.7 × 75.8 mm, with 67 components from 40 distinct parts.
Its main chip is the ESP-WROOM-02, from the ESP32 family. Other key parts include the BP, SI8621AB, NJU7223F33, ATA6561-GAQW and TLP172AM_TPR_E. By type, the board carries 24 resistors, 20 connectors, 9 ICs, 9 diodes, 2 switches and 2 capacitors.
From the project
主目的 - ESP-WROOM-02 を乗せてパソコンとbluepillとのwi-fi通信を実現
主目的 - ESP-WROOM-02 を乗せてパソコンとbluepillとのwi-fi通信を実現
できること - DCモーター 6台 駆動 - 電磁弁 4台 駆動 - ステッピングモーター 1台 駆動 - NeoPixel 1台(使えるか未確認) 駆動 - CAN通信可能 - PA10をHIGHにすることでUSB通信可能

Main components on the Esp bluepill board
Esp bluepill board bill of materials (BOM)
67 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BP | blue_pill | U1 |
| 1 | SI8621AB | SI8621AB | U2 |
| 1 | NJU7223F33 | TO-220-3_Vertical | U3 |
| 1 | ATA6561-GAQW | SOIC8_4P9X3P9MC_MCH-M | U4 |
| 4 | TLP172AM_TPR_E | SOIC254P700X220-4N | U5, U6, U8, U9 |
| 1 | ESP-WROOM-02 esp-wroom-02 | esp-wroom-02 | U7 |
| 1 | UART_PIN | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 2 | 8P8C_LED_SHIELDED 8P8C_LED_Shielded | RJHSE-5381 LAN_port | J2, J3 |
| 1 | terminal_R_PIN | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | XH_5V | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | XT_24V | AMASS_XT30U-F_1x02_P5.0mm_Vertical | J6 |
| 1 | XH_stepping | JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical | J7 |
| 1 | XH_neopixel | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8 |
| 1 | XH_DENJI_1 XH_denji_1 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |
| 1 | XHDENJI_2 XHdenji_2 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J10 |
| 1 | XH_DENJI_3 XH_denji_3 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J11 |
| 1 | XH_DENJI_4 XH_denji_4 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J12 |
| 1 | XH_DC_1 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J13 |
| 1 | XH_DC_2 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J14 |
| 1 | XH_DC_3 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J15 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XH_DC_4 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J16 |
| 1 | XH_DC_5 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J17 |
| 1 | XH_DC_6 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J18 |
| 1 | USB_C_RECEPTACLE_POWERONLY_24P USB_C_Receptacle_PowerOnly_24P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J19 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J20 |
| 1 | LMP78_05-1.0 | CONV_LMP78_05-1.0 | PS1 |
| 1 | SW_Push | TS-1088-AR02016 | SW1 |
| 1 | SW_DPDT_X2 SW_DPDT_x2 | PinHeader_1x03_P2.54mm_Vertical | SW2 |
| 2 | R | LED_0805_2012Metric | D1, D4 |
| 2 | G | LED_0805_2012Metric | D2, D5 |
| 1 | Y | LED_0805_2012Metric | D3 |
| 4 | D | SOD-123FL | D6, D7, D8, D9 |
| 2 | 0.1 | C_0805_2012Metric | C1, C2 |
| 4 | 10K 10k | R_0402_1005Metric | R1, R2, R3, R4 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R5, R6 |
| 9 | 470 | R_0402_1005Metric | R7, R8, R9, R10, R11, R17, R18, R19 +1 |
| 1 | 120 | R_0402_1005Metric | R12 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R13, R14 |
| 4 | 1k | R_0402_1005Metric | R15, R16, R21, R22 |
| 2 | 100K 100k | R_0402_1005Metric | R23, R24 |
Esp bluepill board design files
The KiCad project lives in the ar216-2355/esp_bluepill_board repository on GitHub; these links point at the commit this page was built from.
Esp bluepill board: common questions
What microcontroller does the Esp bluepill board use?
The Esp bluepill board is built around the ESP-WROOM-02, from the ESP32 family.
How big is the Esp bluepill board?
The Esp bluepill board measures 84.7 × 75.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp bluepill board?
67 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp bluepill board design files?
From the ar216-2355/esp_bluepill_board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Esp bluepill board design in my own project?
The repository has no license, so all rights stay with ar216-2355. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp bluepill board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k