HardLabs

DoubleProto

Architeuthis-Flux·Barnacle_Board·Barnacles/DoubleProto/DoubleProto.kicad_pcb

DoubleProto PCB layout, top view — open source board by Architeuthis-Flux
Simulate this board

About the DoubleProto PCB

DoubleProto is an open source PCB design by Architeuthis-Flux, published on GitHub under the MIT license. It is a 2-layer board measuring 167.1 × 26.6 mm, with 11 components from 7 distinct parts.

By type, the board carries 8 connectors and 3 ICs.

It belongs with the dev boards & breakouts and displays & leds designs in this gallery.

From the project

a breadboard you can stick things to

Rev 2 is gonna be quite a bit different from the original (from here on, I will refer to this as just Barnacle Board), LEDs are a separate board, and there are holes that go all the way through the breadboard (a cool side effect of having spring clips with holes for 5 LEDs), and the connector pinout is changed so you can plug stuff in the wrong way and it just swaps the top and bottom halves of the breadboard.

DoubleProto, from the project README
From the project README

DoubleProto bill of materials (BOM)

11 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
1
~
U2
1
~
U3
5
CONN_01X01
Conn_01x01
J1, J2, J3, J4, J5
1
CONN_02X35_TOP_BOTTOM
Conn_02x35_Top_Bottom
J6
1
CONN_02X03_TOP_BOTTOM
Conn_02x03_Top_Bottom
J12
1
CONN_02X03_TOP_BOTTOM
Conn_02x03_Top_Bottom
J13

DoubleProto design files

The KiCad project lives in the Architeuthis-Flux/Barnacle_Board repository on GitHub; these links point at the commit this page was built from.

DoubleProto: common questions

How big is the DoubleProto PCB?

The DoubleProto measures 167.1 × 26.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DoubleProto?

11 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DoubleProto design files?

From the Architeuthis-Flux/Barnacle_Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DoubleProto design in my own project?

Yes, under the terms of its MIT license, which Architeuthis-Flux chose for the repository.

More boards in Barnacle_Board

Similar boards