ShinyBarnacle
About the ShinyBarnacle PCB
ShinyBarnacle is an open source PCB design by Architeuthis-Flux, published on GitHub under the MIT license. It is a 2-layer board measuring 41.3 × 58 mm, with 419 components from 20 distinct parts.
By type, the board carries 400 diodes, 10 connectors and 9 test points.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
a breadboard you can stick things to
ShinyBarnacle bill of materials (BOM)
419 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_02X35_TOP_BOTTOM Conn_02x35_Top_Bottom | HEE70LP03BK_NumberedPads_CardGuide | J1 |
| 1 | PAD_SENSE_1 pad_sense_1 | PinHeader_1x1_Smaller | J2 |
| 1 | PAD_SENSE_30 pad_sense_30 | PinHeader_1x1_Smaller | J3 |
| 1 | PAD_SENSE_60 pad_sense_60 | PinHeader_1x1_Smaller | J4 |
| 1 | PAD_SENSE_31 pad_sense_31 | PinHeader_1x1_Smaller | J5 |
| 1 | Connector_Breadboard | Breadboard_CustomClips_CorrectPins_2 | J11 |
| 1 | CONN_02X03_TOP_BOTTOM TopInMAIN | PinHeader_1x1_Smaller | J12 |
| 1 | CONN_02X03_TOP_BOTTOM BottomInMAIN | PinHeader_1x1_Smaller | J13 |
| 1 | CONN_01X06 Conn_01x06 | GT-B0353FSV06-02B0201 | J14 |
| 1 | CONN_01X01 BottomOutMAIN | PinHeader_1x1_Smaller | J15 |
| 1 | LED DIN | PinHeader_1x1_0.6mm_tinyAF | TP16 |
| 1 | LED 5V | PinHeader_1x1_0.6mm_tinyAF | TP18 |
| 1 | LED GND | PinHeader_1x1_0.6mm_tinyAF | TP19 |
| 1 | TOP_POS_RAIL | Pad_Clip_Banana_PlusSmaller_topBottom | TP24 |
| 1 | TOP_POS_RAIL | PINHEADER_Larger_Pad | TP25 |
| 1 | TOP_NEG_RAIL | Pad_Clip_Banana_MinusSmaller_topBottom | TP26 |
| 1 | TOP_NEG_RAIL | PINHEADER_Larger_Pad | TP27 |
| 1 | BOTTOM_POS_RAIL | PINHEADER_Larger_Pad | TP29 |
| 1 | BOTTOM_NEG_RAIL | PINHEADER_Larger_Pad | TP31 |
| 400 | WS2812B | XL-1010RGBC-WS2812B | D1011, D1012, D1013, D1014, D1015, D1021, D1022, D1023 +392 |
ShinyBarnacle design files
The KiCad project lives in the Architeuthis-Flux/Barnacle_Board repository on GitHub; these links point at the commit this page was built from.
ShinyBarnacle: common questions
How big is the ShinyBarnacle PCB?
The ShinyBarnacle measures 41.3 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ShinyBarnacle?
419 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ShinyBarnacle design files?
From the Architeuthis-Flux/Barnacle_Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ShinyBarnacle design in my own project?
Yes, under the terms of its MIT license, which Architeuthis-Flux chose for the repository.
More boards in Barnacle_Board
WiigLED
78.7 × 58.4 mm513 parts4LMIT10
WideWiig
78.7 × 63.5 mm502 parts4LMIT10
ProtoBarnacle
82.6 × 79.7 mm100 parts4LMIT10
ProtoSMDfootprintField
84.5 × 57.6 mm32 parts4LMIT10
WaferSpaceCOB
82.6 × 50 mm28 parts4LMIT10
BarnacleBoard
84.5 × 63.4 mm20 parts2LMIT10
WigBase
78.8 × 69 mm17 parts2LMIT10
FullProto
84.5 × 57.6 mm11 parts2LMIT10
DoubleProto
167.1 × 26.6 mm11 parts2LMIT10
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979