FullProto
About the FullProto PCB
FullProto is an open source PCB design by Architeuthis-Flux, published on GitHub under the MIT license. It is a 2-layer board measuring 84.5 × 57.6 mm, with 11 components from 8 distinct parts.
By type, the board carries 8 connectors and 3 ICs.
It belongs with the dev boards & breakouts and displays & leds designs in this gallery.
From the project
a breadboard you can stick things to
Rev 2 is gonna be quite a bit different from the original (from here on, I will refer to this as just Barnacle Board), LEDs are a separate board, and there are holes that go all the way through the breadboard (a cool side effect of having spring clips with holes for 5 LEDs), and the connector pinout is changed so you can plug stuff in the wrong way and it just swaps the top and bottom halves of the breadboard.
FullProto bill of materials (BOM)
11 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | HEE70LP03BK_CardSide | U1 |
| 1 | ~ | Conn_8x30_breadboard | U2 |
| 1 | ~ | SideConnect_sparserrr_Top | U3 |
| 1 | CONN_01X01 Conn_01x01 | HEE70LP03BK_NumberedPads_CardGuide | J1 |
| 4 | CONN_01X01 Conn_01x01 | PinHeader_1x1_Smallest | J2, J3, J4, J5 |
| 1 | CONN_01X01 Conn_01x01 | SideConnect_sparserrr_Bottom_drawing | J6 |
| 1 | CONN_02X03_TOP_BOTTOM Conn_02x03_Top_Bottom | SideConnect_short_right_Drawing | J12 |
| 1 | CONN_02X03_TOP_BOTTOM Conn_02x03_Top_Bottom | SideConnect_short_left_Drawing | J13 |
FullProto design files
The KiCad project lives in the Architeuthis-Flux/Barnacle_Board repository on GitHub; these links point at the commit this page was built from.
FullProto: common questions
How big is the FullProto PCB?
The FullProto measures 84.5 × 57.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FullProto?
11 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FullProto design files?
From the Architeuthis-Flux/Barnacle_Board repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FullProto design in my own project?
Yes, under the terms of its MIT license, which Architeuthis-Flux chose for the repository.
More boards in Barnacle_Board
WiigLED
78.7 × 58.4 mm513 parts4LMIT10
WideWiig
78.7 × 63.5 mm502 parts4LMIT10
ShinyBarnacle
41.3 × 58 mm419 parts2LMIT10
ProtoBarnacle
82.6 × 79.7 mm100 parts4LMIT10
ProtoSMDfootprintField
84.5 × 57.6 mm32 parts4LMIT10
WaferSpaceCOB
82.6 × 50 mm28 parts4LMIT10
BarnacleBoard
84.5 × 63.4 mm20 parts2LMIT10
WigBase
78.8 × 69 mm17 parts2LMIT10
DoubleProto
167.1 × 26.6 mm11 parts2LMIT10
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k