HardLabs

CodeurV2

ARIG-Robotique·kicad-projects·CodeurV2/CodeurV2.kicad_pcb

CodeurV2 PCB layout, top view — open source AVR/Arduino board by ARIG-Robotique

About the CodeurV2 PCB

CodeurV2 is an open source AVR/Arduino PCB design by ARIG-Robotique, published on GitHub. It is a 2-layer board measuring 54.4 × 54.1 mm, with 11 components from 9 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 9 connectors and 2 modules.

From the project

Repository des différentes réalisations électroniques

Module de contrôle I2C des alimentations et AU logique.

Module I2C de mesure tension/courant, 4 mesures.

Module I2C de mesure tension/courant, 2 mesures.

Module de lecture de 8 capteurs tout ou rien sur I2C.

Controle I2C de 4 pompes à vide + electrovannes + presiostats.

Shield Raspberry Pi pour connecter les modules.

Module de multiplexage I2C pour 8 capteurs de couleur.

CodeurV2, from the project README
From the project README

Main components on the CodeurV2

Arduino_Nano_v3.x

CodeurV2 bill of materials (BOM)

11 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
Arduino_Nano_v3.x
A1, A2
2
Conn_02x05_Counter_Clockwise
J1, J3
1
C5160761
Conn_02x05_Counter_Clockwise
J2
1
I2C1_5
Conn_01x02_Pin
J4
1
I2C2_5
Conn_01x02_Pin
J5
1
CAN1
Conn_01x02_Pin
J6
1
CAN2
Conn_01x02_Pin
J7
1
Screw_Terminal_01x03
J8
1
Screw_Terminal_01x02
J9

CodeurV2 design files

The KiCad project lives in the ARIG-Robotique/kicad-projects repository on GitHub; these links point at the commit this page was built from.

CodeurV2: common questions

What microcontroller does the CodeurV2 use?

The CodeurV2 is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the CodeurV2 PCB?

The CodeurV2 measures 54.4 × 54.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CodeurV2?

11 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the CodeurV2 design files?

From the ARIG-Robotique/kicad-projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the CodeurV2 design in my own project?

The repository has no license, so all rights stay with ARIG-Robotique. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the CodeurV2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in kicad-projects

Similar boards