HardLabs

DetecteurCarreFouille

ARIG-Robotique·kicad-projects·DetecteurCarreFouille/DetecteurCarreFouille.kicad_pcb

DetecteurCarreFouille PCB layout, top view — open source AVR/Arduino board by ARIG-Robotique

About the DetecteurCarreFouille PCB

DetecteurCarreFouille is an open source AVR/Arduino PCB design by ARIG-Robotique, published on GitHub. It is a 2-layer board measuring 36.3 × 58 mm, with 11 components from 6 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. By type, the board carries 6 jumpers, 2 connectors, 1 module, 1 capacitor and 1 resistor.

From the project

Repository des différentes réalisations électroniques

Module de contrôle I2C des alimentations et AU logique.

Module I2C de mesure tension/courant, 4 mesures.

Module I2C de mesure tension/courant, 2 mesures.

Module de lecture de 8 capteurs tout ou rien sur I2C.

Controle I2C de 4 pompes à vide + electrovannes + presiostats.

Shield Raspberry Pi pour connecter les modules.

Module de multiplexage I2C pour 8 capteurs de couleur.

DetecteurCarreFouille, from the project README
From the project README

Main components on the DetecteurCarreFouille

Arduino_Nano_v3.x

DetecteurCarreFouille bill of materials (BOM)

11 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Arduino_Nano_v3.x
A1
1
C5160761
ARIG Interf
J2
1
Screw_Terminal_01x12
J3
6
SolderJumper_2_Open
JP1, JP2, JP3, JP4, JP5, JP6
1
100U
100n
C1
1
1k
R1

DetecteurCarreFouille design files

The KiCad project lives in the ARIG-Robotique/kicad-projects repository on GitHub; these links point at the commit this page was built from.

DetecteurCarreFouille: common questions

What microcontroller does the DetecteurCarreFouille use?

The DetecteurCarreFouille is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the DetecteurCarreFouille PCB?

The DetecteurCarreFouille measures 36.3 × 58 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DetecteurCarreFouille?

11 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DetecteurCarreFouille design files?

From the ARIG-Robotique/kicad-projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the DetecteurCarreFouille design in my own project?

The repository has no license, so all rights stay with ARIG-Robotique. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DetecteurCarreFouille without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in kicad-projects

Similar boards