ControleursPompes
About the ControleursPompes PCB
ControleursPompes is an open source STM32 PCB design by ARIG-Robotique, published on GitHub. It is a 4-layer board measuring 90.8 × 49.5 mm, with 94 components from 58 distinct parts.
Its main chip is the STM32G474RETX, from the STM32 family. Other key parts include the AMS1117-3.3, 74LVC1G02, MCP2558FD-XSN and LM358. By type, the board carries 30 resistors, 26 capacitors, 19 connectors, 6 ICs, 6 diodes and 3 switches.
From the project
Repository des différentes réalisations électroniques
Module de contrôle I2C des alimentations et AU logique.
Module I2C de mesure tension/courant, 4 mesures.
Module I2C de mesure tension/courant, 2 mesures.
Module de lecture de 8 capteurs tout ou rien sur I2C.
Controle I2C de 4 pompes à vide + electrovannes + presiostats.
Shield Raspberry Pi pour connecter les modules.
Module de multiplexage I2C pour 8 capteurs de couleur.
Main components on the ControleursPompes
ControleursPompes bill of materials (BOM)
94 components, 58 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | STM32G474RETX STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U2 |
| 2 | 74LVC1G02 TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U3, U4 |
| 1 | MCP2558FD-XSN TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U5 |
| 1 | LM358 TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U6 |
| 2 | BSS138 | SOT-23 | Q1, Q2 |
| 1 | 16MHZ 16Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | SWD | PinHeader_2x05_P1.27mm_Vertical | J1 |
| 1 | C5160761 PWR_IN | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | I2C 5V | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J3 |
| 1 | I2C1_5 I2C 3.3V | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J4 |
| 1 | I2C2_5 ARIG Interf | IDC-Header_2x05_P2.54mm_Vertical | J5 |
| 1 | CAN1 PV | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J6 |
| 1 | CAN2 EV | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J7 |
| 4 | VACUOSTAT | TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal | J8, J11, J14, J17 |
| 3 | PV | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J9, J12, J15 |
| 3 | EV | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J10, J13, J16 |
| 1 | Alim 5V | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J18 |
| 1 | TOR | TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal | J19 |
| 1 | C720477 Reset | SW_TS_1088_AR_3x4x2 | SW1 |
Show 38 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BOOT0 Reset | SW_TS_1088_AR_3x4x2 | SW2 |
| 1 | Reset | SW_TS_1088_AR_3x4x2 | SW3 |
| 2 | C63855 Green | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 3 | C63855 Yellow | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D4, D5 |
| 1 | C72037 Yellow | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | 39N 39n | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 1 | 100U 100u | CP_Elec_5x5.3 | C1 |
| 1 | 330u | CP_Elec_6.3x7.7 | C2 |
| 1 | 330U 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3 |
| 1 | 10N 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C4 |
| 1 | 4.7U 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5 |
| 1 | 100N 4.7u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6 |
| 2 | 12P 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7, C10 |
| 4 | 100N 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8, C9, C16, C20 |
| 2 | 100N 12p | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C11, C13 |
| 1 | 100N 1u | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12 |
| 1 | 100N 10n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C14 |
| 2 | 100N 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C19 |
| 2 | 100N 10u | CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C18, C30 |
| 2 | 2.2U 10u | CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C22, C26 |
| 2 | 330U 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23, C27 |
| 2 | 100n | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C24, C28 |
| 4 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R9 |
| 3 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R6, R7 |
| 1 | 10K 68 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5 |
| 1 | 68 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 10K 47 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10 |
| 1 | 10K 150 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 2 | 2.4k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R15 |
| 5 | 10K 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R16, R24, R26, R30 |
| 1 | 150 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 7.5K 150 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 3 | 10K 2.4k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R21, R27 |
| 2 | 5.6K 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19, R22 |
| 1 | 1.8K 150 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 1 | 1.8K 2.4k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R23 |
| 2 | 7.5K 2.4k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R25, R29 |
| 1 | 7.5K 4.7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R28 |
ControleursPompes design files
The KiCad project lives in the ARIG-Robotique/kicad-projects repository on GitHub; these links point at the commit this page was built from.
ControleursPompes: common questions
What microcontroller does the ControleursPompes use?
The ControleursPompes is built around the STM32G474RETX, from the STM32 family.
How big is the ControleursPompes PCB?
The ControleursPompes measures 90.8 × 49.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the ControleursPompes?
94 components, from 58 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ControleursPompes design files?
From the ARIG-Robotique/kicad-projects repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ControleursPompes design in my own project?
The repository has no license, so all rights stay with ARIG-Robotique. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ControleursPompes without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in kicad-projects
STM32MasterAlimCAN
85 × 98.5 mm113 parts4LNo license0
STM32ControlleursAsserv
85 × 56 mm95 parts4LNo license0
STM32MasterAlimSTM32
103.8 × 72.4 mm65 parts2LNo license0- schematic only · 49 partsSTM32
00 BaseCanSTM32Board
49 parts4LNo license0 
Raspberry PiInterfaceRaspi
65 × 56 mm46 parts4LNo license0
CapteursNumerique
40 × 39 mm44 parts2LNo license0
Raspberry PiInterfaceRaspiCAN
65 × 56 mm32 parts4LNo license0
MultiplexeurCouleur
49.5 × 33.8 mm24 parts4LNo license0
AVR/ArduinoCodeurV2
54.4 × 54.1 mm11 parts2LNo license0
AVR/ArduinoDetecteurCarreFouille
36.3 × 58 mm11 parts2LNo license0
InterfaceMotorPami
31.3 × 25.5 mm3 parts2LNo license0
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32Type c
google
188 × 30 mm17 parts2LApache-2.02.9k
STM32Main panel
234 × 84 mm26 parts4LApache-2.02.9k
STM32Base
52.3 × 52.3 mm36 parts2LApache-2.02.9k
STM32Type a
150 × 30 mm14 parts2LApache-2.02.9k
STM32Type e
140.5 × 30 mm13 parts2LApache-2.02.9k