Smartrover

arounamounchili·smartrover·hardware/SmartRover.kicad_pcb

Smartrover PCB layout, top view — open source ESP32 board by arounamounchili

About the Smartrover PCB

Smartrover is an open source ESP32 PCB design by arounamounchili, published on GitHub under the MIT license. It is a 4-layer board measuring 45 × 80 mm, with 74 components from 31 distinct parts.

Its main chip is the ESP32-S3-MINI-1-N8, from the ESP32 family. Other key parts include the MCP73833T-AMI/MF, MP2153GQFU-33-P, A3908EEETR-T and BMI323. By type, the board carries 31 resistors, 17 capacitors, 8 ICs, 8 diodes, 5 connectors and 3 switches.

It belongs with the robotics & motion and power & battery designs in this gallery.

From the project

ESP32-S3 no_std async Rust (Embassy) teleoperated 4WD mobile robot with embedded FPV web cockpit, 4-layer KiCad PCB, and build123d 3D-printable chassis

4-layer 1.6 mm FR4 carrier board (45 × 80 mm) designed in KiCad 9.0+.

- Schematics (PDF): schematics.pdf - KiCad Project: SmartRover.kicadpro, SmartRover.kicadpcb, and SmartRover.kicadsch linking: - PowerSupply.kicadsch — MCP73833 LiPo charger (IC101), MP2153 3.3 V buck (IC102), USB-C power input (J101), JST-PH battery (J102), SPDT charge/run switch (S101). - Microcontroller.kicadsch — ESP32-S3-MINI-1-N8 (U201), UART header (J201), Tag-Connect JTAG (J202), RESET/BOOT buttons (S201/S202), status LEDs. - SensorActuator.kicadsch — 4× A3908 motor drivers (IC301–IC304), BMI323 IMU (IC305)…

Smartrover, from the project README
From the project README

Main components on the Smartrover

Smartrover bill of materials (BOM)

74 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP73833T-AMI/MF
MCP73833T-AMI_MF
Microchip Technology
IC101
1
MP2153GQFU-33-P
Monolithic Power Systems
IC102
4
A3908EEETR-T
Allegro MicroSystems
IC301, IC302, IC303, IC304
1
BMI323
Bosch Sensortec
IC305
1
ESP32-S3-MINI-1-N8
ESP32-S3-MINI-1
Espressif Systems
U201
1
2171780001
Molex
J101
1
B2B-PH-K-S
JST BATT
JST Sales America Inc.
J102
1
61300411121
UART
Würth Elektronik
J201
1
SLW-108-01-G-S
Samtec
J309
1
SM04B-SRSS-TB(LF)(SN)
SM04B-SRSS-TB_LF__SN_
JST Sales America Inc.
J310
1
500SSP1S1M2QEA
E-Switch
S101
2
PTS810SJK250SMTR LFS
PTS810SJK250SMTR_LFS
C&K
S201, S202
1
NTCG163JF103HT1
10k
TDK Corporation
TH101
1
TPD1E10B06DYAR
Texas Instruments
D101
1
150060GS75000
Green LED
Würth Elektronik
D102
4
150060RS75000
Red LED
Würth Elektronik
D103, D104, D203, D204
2
IN-S63AT5UW
White LED
Inolux
D201, D202
1
74437324010
1uH
Würth Elektronik
L101
7
CL10A106MA8NRNC
10µF,25V
Samsung Electro-Mechanics
C101, C102, C201, C301, C303, C305, C307
2
CL10A226MO7JZNC
22µF,16V
Samsung Electro-Mechanics
C103, C104
Show 11 more
QtyPartRefs
7
CL10B104KA8WPNC
0.1µF,25V
Samsung Electro-Mechanics
C202, C302, C304, C306, C308, C309, C310
1
CL10B105KO8VPNC
1µF,16V
Samsung Electro-Mechanics
C203
2
ERJ-3EKF5101V
5k1
Panasonic Electronic Components
R101, R102
3
RC0603FR-07150RL
150
YAGEO
R103, R104, R108
2
ERA-3AEB132V
1k3
Panasonic Electronic Components
R105, R106
1
ERJ-PB3B7502V
75k
Panasonic Electronic Components
R107
2
ERJ-3EKF1003V
100k
Panasonic Electronic Components
R109, R110
11
RC1608F103CS
10k
Samsung Electro-Mechanics
R201, R202, R207, R208, R209, R210, R213, R302 +3
4
RC0603FR-07100RL
100
YAGEO
R203, R204, R205, R206
2
RC1608F222CS
2k2
Samsung Electro-Mechanics
R211, R212
4
AT0603BRD077K5L
7k5
YAGEO
R301, R303, R305, R307

Smartrover design files

The KiCad project lives in the arounamounchili/smartrover repository on GitHub; these links point at the commit this page was built from.

Smartrover: common questions

What microcontroller does the Smartrover use?

The Smartrover is built around the ESP32-S3-MINI-1-N8, from the ESP32 family.

How big is the Smartrover PCB?

The Smartrover measures 45 × 80 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Smartrover?

74 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Smartrover design files?

From the arounamounchili/smartrover repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Smartrover design in my own project?

Yes, under the terms of its MIT license, which arounamounchili chose for the repository.

Can I test firmware for the Smartrover without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards