HardLabs

Painel pcb2

ArqueologiaDigital·PatinhoFeio_Painel_KICAD·painel_pcb2/painel_pcb2.kicad_pcb

Painel pcb2 PCB layout, top view — open source AVR/Arduino board by ArqueologiaDigital

About the Painel pcb2 PCB

Painel pcb2 is an open source AVR/Arduino PCB design by ArqueologiaDigital, published on GitHub. It is a 2-layer board measuring 91.4 × 119.4 mm, with 53 components from 12 distinct parts.

Its main chip is the Arduino_UNO_R3, from the AVR/Arduino family. Other key parts include the MAX7219 and 74LS595. By type, the board carries 38 diodes, 5 connectors, 4 capacitors, 3 ICs, 2 resistors and 1 module.

Main components on the Painel pcb2

MAX721974LS595Arduino_UNO_R3

Painel pcb2 bill of materials (BOM)

53 components, 12 distinct parts.

QtyPartRefs
2
MAX7219
U1, U2
1
74LS595
U3
1
Arduino_UNO_R3
A1
1
Conn_02x16_Counter_Clockwise
J1
1
Conn_02x02_Counter_Clockwise
J2
1
Conn_02x06_Counter_Clockwise
J3
1
Conn_02x08_Counter_Clockwise
J4
1
Conn_02x03_Counter_Clockwise
J5
38
LED
D1, D2, D3, D4, D5, D6, D7, D8 +30
2
C
C1, C3
2
CP1
C2, C4
2
R
R1, R2

Painel pcb2 design files

The KiCad project lives in the ArqueologiaDigital/PatinhoFeio_Painel_KICAD repository on GitHub; these links point at the commit this page was built from.

Painel pcb2: common questions

What microcontroller does the Painel pcb2 use?

The Painel pcb2 is built around the Arduino_UNO_R3, from the AVR/Arduino family.

How big is the Painel pcb2 PCB?

The Painel pcb2 measures 91.4 × 119.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Painel pcb2?

53 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Painel pcb2 design files?

From the ArqueologiaDigital/PatinhoFeio_Painel_KICAD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Painel pcb2 design in my own project?

The repository has no license, so all rights stay with ArqueologiaDigital. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Painel pcb2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in PatinhoFeio_Painel_KICAD

Similar boards