HardLabs

Painel pcb1

ArqueologiaDigital·PatinhoFeio_Painel_KICAD·painel_pcb1/painel_pcb1.kicad_pcb

Painel pcb1 PCB layout, top view — open source RP2040/RP2350 board by ArqueologiaDigital

About the Painel pcb1 PCB

Painel pcb1 is an open source RP2040/RP2350 PCB design by ArqueologiaDigital, published on GitHub. It is a 2-layer board measuring 91.4 × 119.4 mm, with 59 components from 14 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the MAX7219 and 74LS595. By type, the board carries 38 diodes, 8 connectors, 6 capacitors, 5 ICs and 2 resistors.

Main components on the Painel pcb1

MAX721974LS595Pico

Painel pcb1 bill of materials (BOM)

59 components, 14 distinct parts.

QtyPartRefs
2
MAX7219
U1, U2
2
74LS595
U3, U4
1
Pico
U5
1
Conn_01x04
J1
1
Conn_02x02_Counter_Clockwise
J2
1
Conn_02x06_Counter_Clockwise
J3
2
Conn_02x08_Counter_Clockwise
J4, J6
1
Conn_02x03_Counter_Clockwise
J5
1
Conn_02x18_Counter_Clockwise
J7
1
Conn_01x06
J8
38
LED
D1, D2, D3, D4, D5, D6, D7, D8 +30
4
C
C1, C3, C5, C6
2
CP1
C2, C4
2
R
R1, R2

Painel pcb1 design files

The KiCad project lives in the ArqueologiaDigital/PatinhoFeio_Painel_KICAD repository on GitHub; these links point at the commit this page was built from.

Painel pcb1: common questions

What microcontroller does the Painel pcb1 use?

The Painel pcb1 is built around the Pico, from the RP2040/RP2350 family.

How big is the Painel pcb1 PCB?

The Painel pcb1 measures 91.4 × 119.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Painel pcb1?

59 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the Painel pcb1 design files?

From the ArqueologiaDigital/PatinhoFeio_Painel_KICAD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Painel pcb1 design in my own project?

The repository has no license, so all rights stay with ArqueologiaDigital. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Painel pcb1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in PatinhoFeio_Painel_KICAD

Similar boards