HardLabs

Soil sensor kicad tht

ArtoLabs·Sensi-pot·Soil_Sensor/Hardware/Kicad/soil_sensor_kicad_tht.kicad_pcb

Soil sensor kicad tht PCB layout, top view — open source AVR/Arduino board by ArtoLabs

About the Soil sensor kicad tht PCB

Soil sensor kicad tht is an open source AVR/Arduino PCB design by ArtoLabs, published on GitHub under the MIT license. It is a 2-layer board measuring 22.5 × 88.1 mm, with 29 components from 20 distinct parts.

Its main chip is the ATmega328P-PU, from the AVR/Arduino family. Other key parts include the 74lvc1g125. By type, the board carries 13 resistors, 4 connectors, 3 transistors, 3 capacitors, 2 ICs and 1 crystal.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

Collection of modules for indoor/outdoor gardening automation and environmental control

This is the first Sensi-Pot open source automation device made for regulating the temperature and humidity of an enclosed space, including greenhouses. Marijuana grows best when the environment is kept at a perfect balance, and this device can maintain a perfect 55% humidity and 75 degrees fahrenheit, which is perfect for marijuana. The controller can be adjusted to regulate any temperature or level of humidity. At the heart of the device is the custom circuit board, which can be ordered using the open source Gerber files, or by ordering through PCBway.com (see below for more info).

Main components on the Soil sensor kicad tht

ATmega328P-PU74lvc1g125

Soil sensor kicad tht bill of materials (BOM)

29 components, 20 distinct parts.

QtyPartRefs
1
ATmega328P-PU
U1
1
74lvc1g125
U2
3
2N3904
Q1, Q2, Q3
1
Crystal
Y1
1
Conn_01x02
J1
1
Conn_01x03
J2
1
Conn_01x05
J3
1
USB3_A
J4
1
Buzzer
BZ1
1
Thermistor
TH1
1
LED_CRGB
D1
1
CP
C1
2
C_Small
C2, C3
1
R_PHOTO
R1
2
R1K
R2, R3
2
R10K
R4, R11
1
R150
R5
2
R390
R6, R7
4
R220
R8, R9, R10, R12
1
R50
R13

Soil sensor kicad tht design files

The KiCad project lives in the ArtoLabs/Sensi-pot repository on GitHub; these links point at the commit this page was built from.

Soil sensor kicad tht: common questions

What microcontroller does the Soil sensor kicad tht use?

The Soil sensor kicad tht is built around the ATmega328P-PU, from the AVR/Arduino family.

How big is the Soil sensor kicad tht PCB?

The Soil sensor kicad tht measures 22.5 × 88.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Soil sensor kicad tht?

29 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the Soil sensor kicad tht design files?

From the ArtoLabs/Sensi-pot repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Soil sensor kicad tht design in my own project?

Yes, under the terms of its MIT license, which ArtoLabs chose for the repository.

Can I test firmware for the Soil sensor kicad tht without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Sensi-pot

Similar boards