HardLabs

Environment Controller KiCad THT

ArtoLabs·Sensi-pot·Environment_Controller/Hardware/Kicad/Environment_Controller_KiCad_THT.kicad_pcb

Environment Controller KiCad THT PCB layout, top view — open source ESP8266 board by ArtoLabs

About the Environment Controller KiCad THT PCB

Environment Controller KiCad THT is an open source ESP8266 PCB design by ArtoLabs, published on GitHub under the MIT license. It is a 2-layer board measuring 96 × 73 mm, with 45 components from 32 distinct parts.

Its main chip is the ESP-01, from the ESP8266 family. Other key parts include the DHT11, ATmega328P-PU, LM317_TO3, Winbond_W25Q32BV and 74HC595. By type, the board carries 18 resistors, 10 capacitors, 7 ICs, 4 connectors, 1 crystal and 1 buzzer.

It belongs with the sensors, iot & wireless and displays & leds designs in this gallery.

From the project

Collection of modules for indoor/outdoor gardening automation and environmental control

This is the first Sensi-Pot open source automation device made for regulating the temperature and humidity of an enclosed space, including greenhouses. Marijuana grows best when the environment is kept at a perfect balance, and this device can maintain a perfect 55% humidity and 75 degrees fahrenheit, which is perfect for marijuana. The controller can be adjusted to regulate any temperature or level of humidity. At the heart of the device is the custom circuit board, which can be ordered using the open source Gerber files, or by ordering through PCBway.com (see below for more info).

Main components on the Environment Controller KiCad THT

DHT11ATmega328P-PUESP-01LM317_TO3Winbond_W25Q32BV74HC595NE555

Environment Controller KiCad THT bill of materials (BOM)

45 components, 32 distinct parts.

QtyPartRefs
1
DHT11
U1
1
ATmega328P-PU
U2
1
ESP-01
U3
1
LM317_TO3
U4
1
Winbond_W25Q32BV
U5
1
74HC595
U6
1
NE555
U7
1
Crystal
Y1
1
Barrel_Jack_MountingPin
J1
1
Conn_01x03
J2
1
Conn_01x05
J3
1
Conn_01x10
J4
1
Buzzer
BZ1
1
WC1602A
DS1
1
R10K
RV1
1
SW_DPDT_x2
SW1
1
LM2596
L1
3
CP1uF
C1, C5, C7
2
C22pF
C2, C3
2
C0.1uF
C4, C6
Show 12 more
QtyPartRefs
1
C0.01uF(103)
C8
1
CP10uF
C9
1
CP100uF
C10
5
R10K
R1, R2, R6, R11, R20
2
R1K
R3, R19
1
R2K
R4
1
R240
R7
1
R390
R8
3
R50
R9, R14, R15
3
R100
R10, R13, R16
1
LDR
R12
1
R100K
R17

Environment Controller KiCad THT design files

The KiCad project lives in the ArtoLabs/Sensi-pot repository on GitHub; these links point at the commit this page was built from.

Environment Controller KiCad THT: common questions

What microcontroller does the Environment Controller KiCad THT use?

The Environment Controller KiCad THT is built around the ESP-01, from the ESP8266 family.

How big is the Environment Controller KiCad THT PCB?

The Environment Controller KiCad THT measures 96 × 73 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Environment Controller KiCad THT?

45 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the Environment Controller KiCad THT design files?

From the ArtoLabs/Sensi-pot repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Environment Controller KiCad THT design in my own project?

Yes, under the terms of its MIT license, which ArtoLabs chose for the repository.

Can I test firmware for the Environment Controller KiCad THT without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in Sensi-pot

Similar boards