Shield
aryakaithal8·Jammer·PCB/shield.kicad_pcb
About the Shield
Shield is an open source PCB design by aryakaithal8, published on GitHub. It is a 2-layer board measuring 53.1 × 100.5 mm, with 27 components from 11 distinct parts.
Other key parts include the NRF24L01, TSOP1738 and CC1101RGPR. By type, the board carries 13 connectors, 5 ICs, 3 capacitors, 3 resistors, 2 diodes and 1 transistor.
It belongs with the dev boards & breakouts, rf & radio and usb & debug tools designs in this gallery.
From the project
A jamming device which jam everything
Jammer is my custom handheld electronics project, built around an ESP32-S3-WROOM-1-N16 with a main board, a separate shield and a custom enclosure.
so basically i wanted to make a handheld device with its own screen, buttons, battery and a proper case, but i also wanted to go further than just connecting a bunch of ready-made modules together.. custom schematics, a stacked PCB design, touch display, storage, infrared, status feedback and the firmware side too. i designed the electronics in KiCad and worked on the enclosure in Fusion 360, which turned into a much bigger rabbit hole than…

Main components on the Shield
Shield bill of materials (BOM)
27 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | NRF24L01 | QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U7, U8, U9 |
| 1 | TSOP1738 | TSOP17XX | U10 |
| 1 | CC1101RGPR | RGP20_2P4X2P4 | U11 |
| 1 | S8050 | TO-92_Inline | Q5 |
| 11 | Conn_Coaxial | SMA_Amphenol_132289_EdgeMount | J6, J7, J8, J11, J12, J13, J14, J15 +3 |
| 2 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Vertical | J9, J10 |
| 1 | IR | LED_D5.0mm | D8 |
| 1 | LED | LED_0603_1608Metric | D9 |
| 3 | 10UF 10uf | C_0805_2012Metric | C20, C21, C22 |
| 2 | 0R | R_0603_1608Metric | R36, R37 |
| 1 | 1k | R_0603_1608Metric | R38 |
Shield design files
The KiCad project lives in the aryakaithal8/Jammer repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/shield.kicad_pcb
- SchematicPCB/shield.kicad_sch
- BOMProduction/bom.csv
Shield: common questions
How big is the Shield?
The Shield measures 53.1 × 100.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Shield?
27 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Shield design files?
From the aryakaithal8/Jammer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Shield design in my own project?
The repository has no license, so all rights stay with aryakaithal8. Use it as a reference, and ask the author before reusing the design.
More boards in Jammer
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979