Jammer
aryakaithal8·Jammer·PCB/Jammer.kicad_pcb
About the Jammer PCB
Jammer is an open source ESP32 PCB design by aryakaithal8, published on GitHub. It is a 2-layer board measuring 53.1 × 100.5 mm, with 90 components from 37 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the LF33_TO220, CP2102N-AXX-XQFN28, IP5306, PCF8574T and XPT2046QF. By type, the board carries 35 resistors, 19 capacitors, 10 switches, 7 diodes, 6 ICs and 5 connectors.
It belongs with the rf & radio and usb & debug tools designs in this gallery.
From the project
A jamming device which jam everything
Jammer is my custom handheld electronics project, built around an ESP32-S3-WROOM-1-N16 with a main board, a separate shield and a custom enclosure.
so basically i wanted to make a handheld device with its own screen, buttons, battery and a proper case, but i also wanted to go further than just connecting a bunch of ready-made modules together.. custom schematics, a stacked PCB design, touch display, storage, infrared, status feedback and the firmware side too. i designed the electronics in KiCad and worked on the enclosure in Fusion 360, which turned into a much bigger rabbit hole than…

Main components on the Jammer
Jammer bill of materials (BOM)
90 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LF33_TO220 | TO-220-3_Vertical | U1 |
| 1 | CP2102N-AXX-XQFN28 CP2102N-Axx-xQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U2 |
| 1 | IP5306 | SOP127P600X165-9N | U3 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U4 |
| 1 | PCF8574T | SOIC-16W_7.5x10.3mm_P1.27mm | U5 |
| 1 | XPT2046QF | QFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm | U6 |
| 3 | S8050 | TO-92_Inline | Q1, Q2, Q3 |
| 1 | AO3401A | SOT-23 | Q4 |
| 2 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1, J3 |
| 1 | CONN_02X10_ODD_EVEN Conn_02x10_Odd_Even | PinHeader_2x10_P2.54mm_Vertical | J2 |
| 1 | SD_Card_Receptacle | SD_TE_2041021 | J4 |
| 1 | CONN_01X18_SOCKET Conn_01x18_Socket | PinHeader_1x18_P2.54mm_Vertical | J5 |
| 1 | Battery | PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | CMT-7525-80-SMT CMT-7525-80-SMT-TR | XDCR_CMT-7525-80-SMT-TR | LS1 |
| 1 | SI2302-TP | SOT-23 | MOSFET1 |
| 7 | SW_Push | Panasonic_EVQPUJ_EVQPUA | SW1, SW5, SW6, SW7, SW8, SW9, SW10 |
| 1 | RESET | Panasonic_EVQPUJ_EVQPUA | SW2 |
| 1 | BOOT | Panasonic_EVQPUJ_EVQPUA | SW3 |
| 1 | SW_SPDT_321 | SW_SPDT_CK_JS102011SAQN | SW4 |
| 4 | WS2812B-2020 | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1, D2, D3, D4 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LED | LED_0603_1608Metric | D5, D6 |
| 1 | SS12 | D_SMA | D7 |
| 1 | L | L_0603_1608Metric | L1 |
| 8 | 10UF 10uf | C_0603_1608Metric | C1, C4, C5, C7, C13, C14, C16, C18 |
| 2 | 2.2UF 2.2uf | C_0805_2012Metric | C2, C3 |
| 5 | 100NF 100nf | C_0603_1608Metric | C6, C8, C9, C15, C17 |
| 3 | 22UF 22uf | C_0603_1608Metric | C10, C11, C12 |
| 1 | C_Polarized | C_0805_2012Metric | C19 |
| 13 | 1k | R_0603_1608Metric | R1, R7, R8, R11, R12, R13, R15, R20 +5 |
| 1 | 470 | R_0603_1608Metric | R2 |
| 2 | 12K 12k | R_0603_1608Metric | R3, R4 |
| 4 | 5.1K 5.1k | R_0603_1608Metric | R5, R6, R14, R16 |
| 3 | 100K 100k | R_0603_1608Metric | R9, R19, R21 |
| 1 | R | R_0603_1608Metric | R10 |
| 2 | 4.7K 4.7k | R_0603_1608Metric | R17, R22 |
| 1 | 0.5R | R_0603_1608Metric | R18 |
| 8 | 10K 10k | R_0603_1608Metric | R23, R24, R25, R26, R27, R28, R31, R35 |
Jammer design files
The KiCad project lives in the aryakaithal8/Jammer repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Jammer.kicad_pcb
- SchematicPCB/Jammer.kicad_sch
- BOMProduction/bom.csv
Jammer: common questions
What microcontroller does the Jammer use?
The Jammer is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Jammer PCB?
The Jammer measures 53.1 × 100.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jammer?
90 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Jammer design files?
From the aryakaithal8/Jammer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Jammer design in my own project?
The repository has no license, so all rights stay with aryakaithal8. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Jammer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Jammer
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k